Fairchild?

[pipelineaudio]

I am finally learning some coding and have two somewhat useful plugs. Justin did 99.9999999999999999999999% of it but hey, I named one of the faders heh.

Anyhow

grab these:

http://stashbox.org/uploads/1152493262/KanakaMS5

https://stash.reaper.fm/oldsb/1152493...nakaMSEncoder1

Put the encoder in front of reacomp and the decoder after reacomp

Set reacomp in feedback mode with 50msec or so RMS time and a 9dB Knee

Set reacomp's detector input to left channel (which will be actually after the encoder the "M" channel) only.

Bypass the decoder, kanaka ms5, and choose preview filter in reacomp to hear what you are working with.

Set the detector filter hp somewhere above 50 or perhaps much higher and with some futzing you will notice Fairchild type behaviour, but without the bass loss problem in the UAD-1 Fairchild emulation.

Good stuff!

[d. gauss]

what am i "grabbing"? it's all text....

[Art Evans]

Right click and save the link, I suspect.

This sounds like an ms encode - compress - ms decode thing to me - right? A bit like Endorphin (http://www.cockos.com/forum/showpost...&postcount=121 has a practical application).

[bobsled]

Originally Posted by Art Evans

Right click and save the link, I suspect.

This sounds like an ms encode - compress - ms decode thing to me - right? A bit like Endorphin (http://www.cockos.com/forum/showpost...&postcount=121 has a practical application).

save as KanakaMS5.dll and KanakaMSEncoder1.dll?

[Art Evans]

Or with whatever the extension is for Jesusonic FX?

I think we need more input here....

[bobsled]

Got it, I think... Save as all files, no extension. I put KanakaMSEncoder1 into C:\Program Files\REAPER\Effects\Misc...Reaper sees it.

[Subz]

ok i'm a tad confused

i have the files showeing

i have the chain like so

KanakalMSEncoder1>>reacomp>>KanakaMS5

i cant find how to set recomp to feedback mode (except in the detector input, & i have KanakaMS5 bypassed & all the other settings match those discribed in the first post

any extra info?

Subz

[Subz]

ok i have got some intresting results set up like this

KanakalMSEncoder1>>reacomp>>KanakaMS5 (all active)

Detector input: set to Main Input L

100% wet & 50% dry on the Output mix (verry impressed with the lack of phaze when setting it like this in reacomp)

set the other comp settings to your likeing

Subz

[pipelineaudio]

yeah sorry guys I was missing heh

Yeah you wont be able to do it in feedback mode, I screwed up

ANd just put those downloads in your reaper/effects folder anywhere

[Youn]

also, extension doesn't matter, I put a .js on mine so then I can associate an editor to it...

pretty snazzy, pipe

[Subz]

Originally Posted by pipelineaudio

yeah sorry guys I was missing heh

Yeah you wont be able to do it in feedback mode, I screwed up

ANd just put those downloads in your reaper/effects folder anywhere

so is my post "7" or my post "8" in this thread the best way to set it up?

ither way i'm impressed with the sort of sounds i'm getting from reacomp

Subz

[pipelineaudio]

Yeah, in fact, if you set track channels to 4, there is no need to use the MSdecoder

set track chain like this:

Trackchannels 4

Chain: Reagate (input 1 and 2, output left:1 and 3, output right 2 and 4, wetmix -120, drymix 0, just using reagate as a y cord) then kanaka MS5, then reafir (input 1 and 2 output 1 and 2, use reafir for filtering the detector) then reacomp (main input 3 and 4, aux input 1 and 2, output 1 and 2)

set reacomp detector to listen to aux left for M or aux right for S

Use reafir to filter the detector signal to really dial in to the sounds you are wanting to use as control

No need to decode from MS as MS is only in the detector this way