Old 01-31-2018, 03:36 AM   #1
Never
Human being with feelings
 
Join Date: Jul 2016
Location: Ohio, USA
Posts: 404
Default Technical Question For Theme WIP

I am working on a theme which will
show a 'silkscreen' on the TCP and
MCP panels of the signal path as
it correlates to the controls.
I am not sure what level of complexity
the 'silkscreen' will maintain,
as it may get to be too much
for the eyes. However, I would
like to make sure that the signal
flow represented on the panel
is intuitive..so to speak...
for everyone who uses it, and so
I have created a fairly complete
flowchart from which to work
when developing the graphic.
I would like everyone's input
as to the validity / relevance
of the components involved,
and their placement.
Please feel free to clip the
image and arrange it to your
taste. I am shooting for
efficiency, relevance, ease of
visualization.
Remember, this will be in some capacity
printed on the panel, and it doesn't
have to be electronically
or programmatically (lol) precise to
110%, just workable and suitable.

Regards, Never
Never is offline   Reply With Quote
Old 01-31-2018, 12:34 PM   #2
pyerbass
Human being with feelings
 
Join Date: Jan 2009
Posts: 319
Default

Interesting

I did my own version of the signal path to start API v5 (beta 00.00) it was indeed very helpfull!

There is one input missing in my opinion:
THE ITEM: this is the main sound source that you will use in reaper. The monitoring fonction gives you the choice to hear the direct input, or the item, or both.

Also, don't forget that you can record the input OR the output of the channel strip, you should have a way to move the record button on the chain. Same goes for send pre or post fader, but there is no way to use this parameter to change the layout as far as I know.

That's the problem: the signal path in reaper is way too flexible to be drwan!
pyerbass is offline   Reply With Quote
Old 01-31-2018, 02:20 PM   #3
Never
Human being with feelings
 
Join Date: Jul 2016
Location: Ohio, USA
Posts: 404
Default

Quote:
Originally Posted by pyerbass View Post
Interesting

I did my own version of the signal path to start API v5 (beta 00.00) it was indeed very helpfull!

There is one input missing in my opinion:
THE ITEM: this is the main sound source that you will use in reaper. The monitoring fonction gives you the choice to hear the direct input, or the item, or both.

Also, don't forget that you can record the input OR the output of the channel strip, you should have a way to move the record button on the chain. Same goes for send pre or post fader, but there is no way to use this parameter to change the layout as far as I know.

That's the problem: the signal path in reaper is way too flexible to be drwan!
@Pyerbass...thank you for your input. I ahould have clarified...the box at bottom left titled 'sel' would be our input select and the green arrow coming into that box from the 'from
mix' box would signify the ability to record from the mix, or 'print' as we
say in the biz, and the item...hmmm..i understand the necessity to include it but since this is to be a silkscreen for the mixer and tcp panel, and the item mixing operates aside from these basically, why wud it need to be signified on the diagram...or maybe it's just assumed....not sure...this diagram wud be used only for channel
mixing and not item mixing or editing..maybe someone will kick in with ideas....btw..Api 4 was the first theme i DL'd, and what started me theming, and was the underpinning of my first theme. Cant wait to try the new one !!
Never is offline   Reply With Quote
Old 01-31-2018, 04:08 PM   #4
pyerbass
Human being with feelings
 
Join Date: Jan 2009
Posts: 319
Default

Thanks for your kind words unfortunately you will have to wait for V5, it's far from done ;-)

Ok I have been mislead by the REC module.
That's an interesting project! do you want the silk screen to be still or to follow move according the routing?
pyerbass is offline   Reply With Quote
Old 02-01-2018, 10:24 PM   #5
Never
Human being with feelings
 
Join Date: Jul 2016
Location: Ohio, USA
Posts: 404
Default

Quote:
Originally Posted by pyerbass View Post
Thanks for your kind words unfortunately you will have to wait for V5, it's far from done ;-)

Ok I have been mislead by the REC module.
That's an interesting project! do you want the silk screen to be still or to follow move according the routing?
Well, firstly, I want to make two main styles
of panel....one flat set...one 3d
set...on the flats, the controls and
indicators will be ableton like but tweaked
out and very stylized.. all flat, as w/ the the
silkscreen. On the 3d's, the controls, etc., will
be 3d and shadowed...minimally.....and the
components will be old style...rocker
toggles like moog, numeric led readouts,
black slide switches, metallic knobs...
and the silkscreen will use electronic
symbols, etc., where feaseable, and leave spaces
for the controls themselves., think some of the old synths.
Maybe like:
an electronic schematic / flowchart / channel strip hybrid.
Some themes attempt to add traces of this type of signal path display, but manipulated
to be nothing more than aesthetic.

I want a working design that someone...
day one on a daw....day one on REAPER...straight off
of a solid state console, can look at,
understand in depth, appreciate and take
solace in its technical precision, while
(most likely) being shocked greatly at its ability to be
pleasing to the eye despite it's seemingly (on paper) overwhelming design dynamic.
Does that seem to ambitious?

Last edited by Never; 02-01-2018 at 10:30 PM.
Never is offline   Reply With Quote
Old 02-01-2018, 11:39 PM   #6
jrengmusic
Human being with feelings
 
jrengmusic's Avatar
 
Join Date: Jun 2015
Location: Indonesia Raya
Posts: 567
Default

I don’t want to break the spirit. I have only create one theme. Both flat-ish and 3D, only with 5 TCP layout, 6 MCP layout.

Nothing ambitious, just because i want a theme that looks good on my retina screen, familiar, and easy for me to use. So it’s very personal, i’m not too worried how it may look or behave for various kind of user with unpredictable setup.

The 3D is the most time consuming part. No drop shadow, emboss or crazy gradient fills for pseudo three dimension orthographic projection point of view. But real 3D from modelling, texturing, lighting, and rendering hundreds of images in order to make them look accurate but also WALTER programmable.

I thought it would be fun, something to do on a spare time.

Eventually I spent 6-8 hours/day (sometimes more). I finally managed to pull it off for 187 days straight. It become a half year full time job. Now i understand why there were so many work in progress themes with great ideas never seen the light of day.

Ambitious you asked? Knock yourself out.
__________________
JRENG! | M E T R I C
jrengmusic is online now   Reply With Quote
Old 02-06-2018, 08:55 AM   #7
Never
Human being with feelings
 
Join Date: Jul 2016
Location: Ohio, USA
Posts: 404
Default

Quote:
Originally Posted by pyerbass View Post
Thanks for your kind words unfortunately you will have to wait for V5, it's far from done ;-)

Ok I have been mislead by the REC module.
That's an interesting project! do you want the silk screen to be still or to follow move according the routing?
The diagram would be like an animated schematic....with spst switch symbols..like for cut...polarity could have a dpdt switch symbol where the animation switches the circuits...
a spdt switch symbol for the monitor showing the circuit switching between on, off, auto...maybe the gain knob...whic will be flat...will have a
symbol for a var resistor or potentiometer below it, and a label box for that symbol which will be the tcp_vol_label....etc...imdicators will show a led symbol below...etc., then I will have a layout that turns off the silkscreen, and maybe a light and dark for each.....
Never is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 12:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.