|
|
|
09-29-2019, 02:16 PM
|
#1
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
Solved: REAPER does not receive midi!!!
Hi,
I run REAPER v5.980/64 and I have a problem with setting up a midi controller!
I followed every step exactly as told in the REAPER tutorial but it doesīnt work.
I did activate the midi controller as an input device. Did check the use as controller field.
Then I tried to assign a key of the controller to an action parameter, but reaper doesīnt read any midi data.
I checked if midi data is received in the computer with a midi monitor. Everything works fine, only REAPER doesīnt read the midi data at all.
What can I do?
Thanks for help here
Last edited by Slowfox; 01-04-2021 at 10:33 AM.
|
|
|
09-29-2019, 02:38 PM
|
#2
|
Human being with feelings
Join Date: Dec 2009
Location: Oblivion
Posts: 10,255
|
Did you properly set up your audio device and turn it on? Reaper won't use MIDI without an audio device being selected and active.
|
|
|
09-29-2019, 02:41 PM
|
#3
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
Yes I did. everything else worked, also the sound...
The sound device is also the midi interface.
|
|
|
09-29-2019, 02:52 PM
|
#4
|
Human being with feelings
Join Date: Dec 2009
Location: Oblivion
Posts: 10,255
|
You can try the following:
re-install the MIDI device
reboot your computer
use a different USB port
install Reaper with the portable option and see if it works there (in this case it's a problem with your Reaper config)
What exactly is the audio device?
Last edited by foxAsteria; 09-29-2019 at 03:37 PM.
|
|
|
09-29-2019, 02:59 PM
|
#5
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
The device is an AxeFx II.
As far as I can see, the midi signal comes in on all midi channels.
How do I install REAPER with the portable option?
|
|
|
09-29-2019, 03:05 PM
|
#6
|
Human being with feelings
Join Date: Dec 2009
Location: Oblivion
Posts: 10,255
|
Re-run the installer, click the portable option. It will be a new, separate install and won't change your current one.
|
|
|
09-29-2019, 03:25 PM
|
#7
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
I did the following but REAPER opened with all the old settings when I clicked it.
Itīs on a mac.
- If you wish to make a portable installation of REAPER, copy REAPER.app to a folder, and move the contents of your
Library/Application Support/REAPER folder to that same folder (so that REAPER.app and reaper.ini are in the same
place). -
And I have still the same issue.
|
|
|
09-29-2019, 03:34 PM
|
#8
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
O.K. now I managed to make a portable installation but it didīnt change a thing.
What about the midi ports. Donīt know how to change that.
|
|
|
09-29-2019, 03:35 PM
|
#9
|
Human being with feelings
Join Date: Dec 2009
Location: Oblivion
Posts: 10,255
|
I meant physically plug the usb cable into a different usb port. Don't know why I said MIDI port. Do you have any other DAWs you can test with? Or other MIDI devices you can test in Reaper?
|
|
|
09-29-2019, 03:47 PM
|
#10
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
O.K. now I tried my midi piano as a controller and it worked.
|
|
|
09-29-2019, 03:51 PM
|
#11
|
Human being with feelings
Join Date: Dec 2009
Location: Oblivion
Posts: 10,255
|
Ok so probably not Reaper then. Did you try reinstalling the AxeFx software? Could be some better info on their forums as well. Sorry if none of that helps. I'm out of ideas.
|
|
|
09-29-2019, 03:56 PM
|
#12
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
Well it shouldīnt be a problem with the AxeFx. A midi monitoring program on my computer gets all the signals. But maybe itīs a problem with the midi messages theme-self they are SYSEX messages. Canīt reaper read SYSEX?
|
|
|
09-29-2019, 05:23 PM
|
#13
|
Human being with feelings
Join Date: Dec 2009
Location: Oblivion
Posts: 10,255
|
Um no. Sysex can only be read by the hardware or software it's intended for. I'm no expert, but I guess that's why it's called System Exclusive. Is that all your MIDI monitor picks up?
Check the docs for your Axe and find out how to send MIDI CC or Program Change messages, if that's even possible. If not, then the MIDI feature is only intended to do system dumps for backup purposes, or perhaps to communicate with some AxeFx software.
|
|
|
09-29-2019, 05:48 PM
|
#14
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
Well I use the AxeFx just as the midi-interface. The messages come from an audio workstation with motorfaders and everything. And that seems to send only SYSEX messages. SYSEX should be readable by REAPER. ReaControll midi has a SYSEX monitor, so it should be able to read it.
But after a closer look on the midi-monitoring software, I found out that REAPER seems to mix up in- and output of the AxeFx midi.
I already contacted the AxeFx support.
Thanks for the Help so far.
All the best,
Boris
|
|
|
09-29-2019, 06:02 PM
|
#15
|
Human being with feelings
Join Date: Dec 2009
Location: Oblivion
Posts: 10,255
|
Quote:
Originally Posted by Slowfox
ReaControll midi has a SYSEX monitor, so it should be able to read it.
|
Maybe (and I don't know what the purpose of that would be), but you definitely can't trigger actions with Sysex.
Quote:
Originally Posted by Slowfox
But after a closer look on the midi-monitoring software, I found out that REAPER seems to mix up in- and output of the AxeFx midi.
|
I don't believe that's possible. MIDI is a one way street, or we wouldn't need two cables to send it back and forth. I don't want to insult your intelligence, but did you hook it up correctly? Cables should go from Outputs to Inputs.
And what's this "audio workstation with motor faders and everything?" Maybe it's supported by Reaper directly if you can find it in prefs/Control/osc/web. It might be the case that control surfaces use SysEx, I'm not sure. But then it needs to be set up there as a Control Surface and not a MIDI device.
At any rate, if your controller is only sending SysEx, that's your problem, not the Axe nor Reaper.
|
|
|
09-29-2019, 07:09 PM
|
#16
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
Quote:
Originally Posted by foxAsteria
I don't believe that's possible. MIDI is a one way street, or we wouldn't need two cables to send it back and forth. I don't want to insult your intelligence, but did you hook it up correctly? Cables should go from Outputs to Inputs.
|
Yes itīs a one way street. Thats the reason why there is a "Fractal Audio Systems - AXE-FX II - MIDI In and a "Fractal Audio Systems - AXE-FX II - MIDI Out shown in REAPER. The midi-in can be found, where you can a-sign devices as controllers but the AxeFx is, according to my midi-monitor software, sending the signals from "AxeFx II - MIDI Out. That is why I think that in- and out-ports might be mixed up in REAPER.
Quote:
Originally Posted by foxAsteria
And what's this "audio workstation with motor faders and everything?" Maybe it's supported by Reaper directly if you can find it in prefs/Control/osc/web. It might be the case that control surfaces use SysEx, I'm not sure. But then it needs to be set up there as a Control Surface and not a MIDI device.
|
The Workstation is old and has no USB-port. Itīs an AW 4416. But I am able to controll the AxeFx with itīs SYSEX messages, why shouldīnt it be possible to control a DAW that way.
And itīs also sending start and stop messages wich also do not show up in REAPER. And they are common MISC transport messages.
|
|
|
09-29-2019, 07:21 PM
|
#17
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
Found this on the internet:
"REAPER can send and receive (and record) SysEx"
So at least the SysEx messages should show up in REAPER. If not, there is something wrong with the connection between REAPER and the AxeFX!
It has nothing to do with cables outside the computer, because my midi-monitor-software sees the messages coming in from AxeFx Midi Out.
|
|
|
09-29-2019, 07:51 PM
|
#18
|
Human being with feelings
Join Date: Dec 2009
Location: Oblivion
Posts: 10,255
|
Yea sorry I can't help you more. Hopefully Axe support will know what's up. There's enough info here at least for someone more knowledgeable to get some ideas about it though. Good luck.
|
|
|
09-29-2019, 11:07 PM
|
#20
|
Human being with feelings
Join Date: Jun 2013
Location: Krefeld, Germany
Posts: 14,690
|
A Control Surface sending nothing but SysEx ? That is weird !
Bome is great !
(There are cost free ways to do this by programing scripts internally in Reaper or by using Cocos' free OSCIIBot program together with LoopMidi, but this would be a lot of
work to set up.)
-Michael
Last edited by mschnell; 09-29-2019 at 11:13 PM.
|
|
|
09-30-2019, 03:41 AM
|
#21
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
Quote:
Originally Posted by mschnell
A Control Surface sending nothing but SysEx ? That is weird !
|
Well itīs very old and in the SysEx information is everything you need!
Would be great if REAPER would send information of the faders and panning wheels back, so it could trigger the motorfaders in my AW4416.
Boris
|
|
|
09-30-2019, 04:14 AM
|
#22
|
Human being with feelings
Join Date: Jun 2013
Location: Krefeld, Germany
Posts: 14,690
|
The CSI Reaper extension should be able to do this.
See the appropriate thread here.
-Michael
|
|
|
09-30-2019, 04:36 AM
|
#23
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
Quote:
Originally Posted by mschnell
See the appropriate thread here.
|
There is no link...
|
|
|
09-30-2019, 05:14 AM
|
#24
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
Well, I installed the csi extension but I doīnt know how to use it at all!!!
|
|
|
09-30-2019, 06:07 AM
|
#25
|
Human being with feelings
Join Date: Jun 2013
Location: Krefeld, Germany
Posts: 14,690
|
The first message in the said thread (with "CSI" in the header ) provides a link to the wiki that is starting do be a documentation. -> https://github.com/malcolmgroves/reaper_csi/wiki
-Michael
|
|
|
09-30-2019, 09:24 AM
|
#26
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
Well I did set it all up, but the only midi message I get from REAPER is a note on and of when hitting Play and Stop.
No midi gets out of REAPER when I move a fader.
|
|
|
12-22-2020, 04:40 PM
|
#27
|
Human being with feelings
Join Date: Aug 2007
Location: Near Cambridge UK and Near Questembert, France
Posts: 22,754
|
Out of curiosity, did you actually figure out how to get this working properly?
Arrived here after reading your newer thread & got interested in this one.
__________________
Ici on parles Franglais
|
|
|
12-22-2020, 04:53 PM
|
#28
|
Human being with feelings
Join Date: Sep 2019
Location: Munich
Posts: 60
|
Quote:
Originally Posted by ivansc
Out of curiosity, did you actually figure out how to get this working properly?
Arrived here after reading your newer thread & got interested in this one.
|
Yes, I got it done...
Itīs a little bit complicated but works well. But I would have to check for I doīnt remember it. Itīs quite some time ago.
|
|
|
12-23-2020, 06:11 AM
|
#29
|
Human being with feelings
Join Date: Aug 2007
Location: Near Cambridge UK and Near Questembert, France
Posts: 22,754
|
Cool. Glad you got it working.. I am seriously considering resurrecting my old Mac Mini server & running reaper as well as logic on it, so information as to what works and what doesnt is very handy. Already got my Focusrite Liquidmix 32 working with it no problem.
__________________
Ici on parles Franglais
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 08:44 AM.
|