Old 06-10-2008, 04:06 PM   #1
airon
Human being with feelings
 
airon's Avatar
 
Join Date: Aug 2006
Location: Berlin
Posts: 11,817
Default Easy I/O Window cleanup

Right now we have this:


There is quite a bit of noise and confusion here. It is difficult to locate elements here quickly. Therefore I propose to do this to the I/O window :



The lines(bevels) around the section titles Sends, Audio Hardware Outputs, MIDI Hardware Output and Receives are removed. The send names carry only the actual track numbers and names now, and they use the font of the TCP and MCP track labels. In this case Tahoma 12 Bold, which is my personal preference.

Quite a difference, and I hope it's easy to implement as well. What do you guys think ?
__________________
Using Latch Preview (Video) - Faderport 16 setup for CSI 1.1 , CSI 3.10
Website
"My ego comes pre-shrunk" - Randy Thom
airon is offline   Reply With Quote
Old 06-10-2008, 04:29 PM   #2
StepOne
Human being with feelings
 
StepOne's Avatar
 
Join Date: Jan 2008
Location: CA
Posts: 991
Default

darkening the background panes around each different section might also help
__________________
Damn it feels good to be a gangsta.
StepOne is offline   Reply With Quote
Old 06-10-2008, 04:34 PM   #3
beatbybit
Human being with feelings
 
beatbybit's Avatar
 
Join Date: Jul 2006
Location: Hungary
Posts: 3,129
Default

.. but its much clearer,

and i love it.

+1
__________________
panda in the desert
beatbybit is offline   Reply With Quote
Old 06-10-2008, 05:18 PM   #4
Lawrence
Human being with feelings
 
Join Date: Mar 2007
Posts: 21,551
Default

I don't see much difference there honestly. I still think going vertical is the key. Just a (simple?) matter of rearranging and resizing the existing controls.



Lots of wasted space here aside from the other issues.



With scroll bars this kind of routing window wouldn't have to grow at all. Have it show 3 of each as a maximum and scroll anything beyond that maybe, in sets of 3.



It just seems that the "horizontal fader" design for the routing window was just ultimately not a very good idea. Rotate some stuff 90 degrees and it's a whole 'nother ball game.

Last edited by Lawrence; 06-10-2008 at 09:30 PM.
Lawrence is offline   Reply With Quote
Old 06-11-2008, 03:53 AM   #5
malcolmj
Human being with feelings
 
malcolmj's Avatar
 
Join Date: Jan 2006
Location: Australia
Posts: 1,668
Default

Quote:
Originally Posted by Lawrence View Post
With scroll bars this kind of routing window wouldn't have to grow at all. Have it show 3 of each as a maximum and scroll anything beyond that maybe, in sets of 3.

+1. Great idea Lawrence.

Cheers,

Malcolm.
malcolmj is offline   Reply With Quote
Old 06-11-2008, 04:58 AM   #6
Alex Stone
Human being with feelings
 
Alex Stone's Avatar
 
Join Date: Jul 2007
Location: Reaper Fine Arts Department
Posts: 1,607
Default

Lawrence, you get my vote too. Excellent idea. Even with the fact i'm adding a lot more than 1 or 2 sends and receives. (Make the window resizable?)

Alex.
__________________
www.openoctave.org

Last edited by Alex Stone; 06-11-2008 at 05:00 AM.
Alex Stone is offline   Reply With Quote
Old 06-11-2008, 05:06 AM   #7
Lawrence
Human being with feelings
 
Join Date: Mar 2007
Posts: 21,551
Default

Quote:
Originally Posted by Alex Stone View Post
... with the fact i'm adding a lot more than 1 or 2 sends and receives. (Make the window resizable?)

Alex.

Yeah, the idea would be to have it behave much like the undocked mixer does now as a floating window, when it floats. The span of channels in the scrollable areas was just a guess, it could be 5-6-8-10 or more per section and the actual window itself could be much wider.

But it would never get any taller and it would have the ability to be docked and still be practical. Given the complexity of Reaper's routing and the sheer number of physical controls required, I'd also intentionally make those faders and some other things on it a little bit smaller in scale than they are in the MCP, especially the fader width and height.

That smaller scale would allow more adequate spacing to retain clarity while still presenting lots of controls on screen.

For example, that the "Add New" buttons in the mock are only that wide to fill up the available space there. There is room there for, say, a 'Show / Hide' button to hide the Send or Receive groups and only see one or the other or both. Another way to add clarity since you don't always use or need to see both.

3 Stage cycle/toggle? Hide Receives / Hide Sends / Show Both? Also the Audio/Midi lists on the left don't have to be anywhere near that wide if the labeling text is more concise. More room for a couple more channels in the mixer.

Bringing the channel's meter and basic controls to the routing screen as mocked up can also be useful.

Bottom line: Those routing windows are - in reality - mixers... and to have them going sideways is just plain unnatural, especially when they get really big. This is at the root (imho) of most people's ergonomic problems with them even if expressed in other ways.

Early on, the excitement over what you can do with them blocks that out. Later on it starts to bug you.

P.S. There really only needs to be *one routing mixer* that follows the current channel selection. When docked, selecting the TCP channel shows you the routing for that channel in the docker across the bottom width of the screen.

If it's docked, or had been docked at last view before being closed, selecting the I/O on a TCP channel brings that docker window forward, or loads it into the docker and brings it forward.

Last edited by Lawrence; 06-11-2008 at 05:58 AM.
Lawrence is offline   Reply With Quote
Old 06-11-2008, 05:57 AM   #8
ngarjuna
Human being with feelings
 
ngarjuna's Avatar
 
Join Date: Apr 2008
Location: Miami
Posts: 2,298
Default

When you said earlier in the thread make it vertical, I was thinking "I don't see how that would necessarily help."

After seeing the mockup, I see how it would help. +1, looks great.
ngarjuna is offline   Reply With Quote
Old 06-11-2008, 06:04 AM   #9
Art Evans
Mortal
 
Join Date: Feb 2006
Posts: 6,654
Default

Certainly at a glance that vertical display looks good.

I recall a great deal of discussion on this subject some time back, and I think some changes (to what we have now) were then made, but indeed it's not the most satisfactory element of the program none the less.
Art Evans is offline   Reply With Quote
Old 06-11-2008, 07:16 AM   #10
airon
Human being with feelings
 
airon's Avatar
 
Join Date: Aug 2006
Location: Berlin
Posts: 11,817
Default

Certainly the better idea. Fine job.

+1

Here's a slight cleanup in a similar manner as the old idea of mine. Please never use JPEGs again for GUI mockups .



Anything that has no function should not have bevel boxes.
__________________
Using Latch Preview (Video) - Faderport 16 setup for CSI 1.1 , CSI 3.10
Website
"My ego comes pre-shrunk" - Randy Thom
airon is offline   Reply With Quote
Old 06-11-2008, 08:02 AM   #11
spacelabstudio
Human being with feelings
 
spacelabstudio's Avatar
 
Join Date: Apr 2008
Location: Durham, NC
Posts: 70
Default

Great idea.

+1
spacelabstudio is offline   Reply With Quote
Old 06-11-2008, 08:20 AM   #12
Lawrence
Human being with feelings
 
Join Date: Mar 2007
Posts: 21,551
Default

As much as I'd like to take the credit for some great idea in regards to this... and as much as I appreciate the kind responses to the mockup ... I really can't take credit for this one since ... well... uh ...

... all daw mixers kinda look that way don't they? It's not really a coincidence that they do.

It is, after all, at the end of the day, when the rubber meets the r... (well, you get the idea... ) ... just another mixer.

So I'll just say "thanks" before anyone realizes that I didn't really come up with any new idea here.

Uh... thanks?

Last edited by Lawrence; 06-11-2008 at 08:47 AM.
Lawrence is offline   Reply With Quote
Old 06-11-2008, 08:25 AM   #13
JasonTheron
Human being with feelings
 
JasonTheron's Avatar
 
Join Date: Sep 2007
Location: Medford, OR
Posts: 1,207
Default

Quote:
Originally Posted by Lawrence View Post
I don't see much difference there honestly. I still think going vertical is the key. Just a (simple?) matter of rearranging and resizing the existing controls.



Lots of wasted space here aside from the other issues.



With scroll bars this kind of routing window wouldn't have to grow at all. Have it show 3 of each as a maximum and scroll anything beyond that maybe, in sets of 3.



It just seems that the "horizontal fader" design for the routing window was just ultimately not a very good idea. Rotate some stuff 90 degrees and it's a whole 'nother ball game.
Fantastic!
Much cleaner.
++1
__________________
"pff... anybody who has over 900 posts is a total dork..." -Till (Post count of 932 as of the date of this quote)

My Band - http://ischemiacore.com
Till's FR Vote Tracker - http://tillmannn.de/reaper.html -
Underground Music in Southern Oregon - http://www.myspace.com/sohcindustries
JasonTheron is offline   Reply With Quote
Old 06-11-2008, 08:39 AM   #14
Lawrence
Human being with feelings
 
Join Date: Mar 2007
Posts: 21,551
Default

Quote:
Originally Posted by airon View Post
Here's a slight cleanup in a similar manner as the old idea of mine. Please never use JPEGs again for GUI mockups .



Anything that has no function should not have bevel boxes.
Nice. That does make a difference in visible clarity on the left side.

Last edited by Lawrence; 06-11-2008 at 09:47 AM.
Lawrence is offline   Reply With Quote
Old 06-11-2008, 10:39 AM   #15
labyrinth
Human being with feelings
 
labyrinth's Avatar
 
Join Date: Nov 2007
Location: Massachusetts, USA
Posts: 2,248
Default

++1 for this...it's a much better approach.
__________________
www.res-ref.com | Resonant Reflections
iMac 3.2 GHz (i5 4570)/16GB RAM | OSX 10.10 (Yosemite) | Interface: Focusrite 18i6
labyrinth is offline   Reply With Quote
Old 06-11-2008, 01:17 PM   #16
xackley
Human being with feelings
 
Join Date: Feb 2007
Location: Kitchen table, next to frig
Posts: 1,179
Default

Very Good!

Except I want the Recieve Left of the Sends

Also I don't think the Hardware Sends Need a special button. If the Send Names, at the top, was actually a Drop Down List, the Hardware Outs could just be part of the Menu for destination.

The list could be

None
------
Track1
Track2
------
ASIO Out 1/2
ASIO Out 3/4
ASIO Out 1
ASIO Out 2
etc.


And I want the the Track Channel Text to be a button to popup an In Track routing Matrix
__________________
^^^^^^^^^^
https://soundcloud.com/user-463176271
xackley is offline   Reply With Quote
Old 06-11-2008, 02:34 PM   #17
plush2
Human being with feelings
 
Join Date: May 2006
Location: Saskatoon, Canada
Posts: 2,110
Default

+1 and ten characters
plush2 is offline   Reply With Quote
Old 06-11-2008, 05:52 PM   #18
airon
Human being with feelings
 
airon's Avatar
 
Join Date: Aug 2006
Location: Berlin
Posts: 11,817
Default

Some additional ideas for cosmetics and the inevitable Trim automation modes. These trim mode switches can only be on for the Write, Latch and Touch modes. They'd have the same effect for the Write and Latch mode.



The Pre-FX/Post-FX/Post button could use some work. Also, the channel routing will inevitably someday be able to do more than two channels for 5.1 mixing, so that'll need perhaps a little more space at a later time.
__________________
Using Latch Preview (Video) - Faderport 16 setup for CSI 1.1 , CSI 3.10
Website
"My ego comes pre-shrunk" - Randy Thom

Last edited by airon; 06-11-2008 at 06:43 PM.
airon is offline   Reply With Quote
Old 06-11-2008, 06:36 PM   #19
Lawrence
Human being with feelings
 
Join Date: Mar 2007
Posts: 21,551
Default

Quote:
Originally Posted by airon View Post
Some additional ideas for cosmetics and the inevitable Trim automation modes. These trim mode switches can only be on for the Write, Latch and Touch modes. They'd have the same effect for the Write and Latch mode.



The Pre-FX/Post-FX/Post button could use some work. Also, the channel routing will inevitably someday be able to do more than two channels for 5.1 mixing, so that'll need perhaps a little more space at a later time.
Hehe... very nice Mr. A.

One thing I do in VB a lot is use labels that trigger popup menus, with the menu sub-routine performing the function (or pointing to it) and the label just changing it's text to reflect what you selected in from the menu... status.

I works very well in situations like these since there would be no arrow there - just "1/2" or "9/10" for audio and "All" or 1-16 for midi.

To change the choice you just click the word to get the menulist, which is another benefit for workflow since it's a bigger target for the mouse than the tiny selection arrow in some cases.

So imagine in your graphic above just "1/2" there and nothing else except maybe a light divider line between the groups. Popup menus can be *very* nice design wise.

Last edited by Lawrence; 06-11-2008 at 06:46 PM.
Lawrence is offline   Reply With Quote
Old 06-11-2008, 06:48 PM   #20
airon
Human being with feelings
 
airon's Avatar
 
Join Date: Aug 2006
Location: Berlin
Posts: 11,817
Default

(Just edited it again slightly. Trim buttons are gone for tracks that have an automation mode set to a mode that can't use it)

Yeah, the arrow seems unnecessary. I mainly modelled it from the buttons on the left, but this could work better if left out.

One arrow could sit in between the Input and Output routing to show the signal direction. I'll put it in right away.
__________________
Using Latch Preview (Video) - Faderport 16 setup for CSI 1.1 , CSI 3.10
Website
"My ego comes pre-shrunk" - Randy Thom
airon is offline   Reply With Quote
Old 06-11-2008, 07:09 PM   #21
Lawrence
Human being with feelings
 
Join Date: Mar 2007
Posts: 21,551
Default

Space efficiency?

Lawrence is offline   Reply With Quote
Old 06-11-2008, 07:13 PM   #22
airon
Human being with feelings
 
airon's Avatar
 
Join Date: Aug 2006
Location: Berlin
Posts: 11,817
Default

This iteration has your idea for the routing buttons implemented, plus using an arrow to indicate signal direction.

Also, peak indicators, level indicators and slighty expansion of the height of the send control have been done to accomodate the additional level indicator of the send.

__________________
Using Latch Preview (Video) - Faderport 16 setup for CSI 1.1 , CSI 3.10
Website
"My ego comes pre-shrunk" - Randy Thom
airon is offline   Reply With Quote
Old 06-11-2008, 07:19 PM   #23
airon
Human being with feelings
 
airon's Avatar
 
Join Date: Aug 2006
Location: Berlin
Posts: 11,817
Default

Lawrence, you mean like this perhaps :



=edit=
Some additional cleanups for text and colour were done. The routing text is smaller and has a slightly lighter colour in the upper half.
__________________
Using Latch Preview (Video) - Faderport 16 setup for CSI 1.1 , CSI 3.10
Website
"My ego comes pre-shrunk" - Randy Thom

Last edited by airon; 06-11-2008 at 07:39 PM.
airon is offline   Reply With Quote
Old 06-11-2008, 07:46 PM   #24
Lawrence
Human being with feelings
 
Join Date: Mar 2007
Posts: 21,551
Default

That's all good stuff. Thanks. I wonder how Justin feels about this in general?

P.S. I'm not sure about the additional meters though with these being only sends and all, that might be too much since every meter will always be active (fed from the same source)? And if it's post (ch) fader metering they all will be indentical. If it's post (send) fader maybe but ... I think still too much for a send bus.

Even then they will always go up and down in perfect sync (even at different levels) which would be kinda weird... 10 faders (sends) all metering the same.

Brining the channel meter over pretty much handled the metering.


Last edited by Lawrence; 06-11-2008 at 07:56 PM.
Lawrence is offline   Reply With Quote
Old 06-12-2008, 07:28 AM   #25
boka
Human being with feelings
 
boka's Avatar
 
Join Date: May 2007
Location: Hungary,Europe
Posts: 800
Default

Quote:
Originally Posted by airon View Post
Therefore I propose to do this to the I/O window :




I like this!! Very goood, Airon! +1!
__________________
15" Retina MBP, Adobe CC, UA Apollo
boka is offline   Reply With Quote
Old 06-12-2008, 07:47 AM   #26
inthepipeline
Human being with feelings
 
inthepipeline's Avatar
 
Join Date: Mar 2007
Location: Bristol, UK. Slowly sinking island next to mainland Europe
Posts: 542
Default

I like Airon's implementation.

I agree that combining horizontal and vertical faders in different parts of Reaper can be a little confusing. It probably depends on whether a particular user has more of a preference for using the faders in the main window, or the mixer.

From my point of view, being a major mixer user, I particularly like the idea of this because if the option to keep the send/return window open is selected it fits in nicely with the main mixer, eg. scrolling left to right and appearing with the same orientation. In fact, it could look exactly like the main mixer, but with the additional drop-down menus for audio and MIDI routing in the empty space on the right of the fader.
This would keep the whole thing within the concept of skin-ability, using all existing elements in existing skins.


IMO each tracks automation button should also appear in the main mixer, but that's another issue.



*I*
__________________
10core Xeon w.128gig RAM, lots of SSD, HDSP9652, MOTU828, Tannoy System 8 NFM.

Last edited by inthepipeline; 06-12-2008 at 08:34 AM.
inthepipeline is offline   Reply With Quote
Old 06-12-2008, 08:54 AM   #27
Tallisman
Human being with feelings
 
Tallisman's Avatar
 
Join Date: Jan 2007
Location: in the middle of the icecube.
Posts: 7,403
Default

L-Dawg! Nice! I am diggin' on that something fierce!

My only request is this:


I believe that any tweaking of this window needs to incorporate a drop-down menu for all
configured sends and receives, such that we can quickly re-assign a send/receive without
losing the configuration settings.



.t
__________________
.t

_____________________________
http://jomei.bandcamp.com <--My Middle Son.

http://tallisman.bandcamp.com <--Me.

"Excuse me. Could you please point me in the direction of the self-help section?"
Tallisman is offline   Reply With Quote
Old 06-12-2008, 09:12 AM   #28
spikemullings
Human being with feelings
 
spikemullings's Avatar
 
Join Date: Aug 2007
Location: East London
Posts: 1,719
Default

Good lord


I'll have a pint of whatever you guys are having.


+1
__________________
Cloth-Eared Hobbyist
http://www.reverbnation.com/spikemullings
spikemullings is offline   Reply With Quote
Old 06-12-2008, 09:14 AM   #29
labyrinth
Human being with feelings
 
labyrinth's Avatar
 
Join Date: Nov 2007
Location: Massachusetts, USA
Posts: 2,248
Default

This is really looking to be a lot more logical!!!!
__________________
www.res-ref.com | Resonant Reflections
iMac 3.2 GHz (i5 4570)/16GB RAM | OSX 10.10 (Yosemite) | Interface: Focusrite 18i6
labyrinth is offline   Reply With Quote
Old 06-12-2008, 09:17 AM   #30
inthepipeline
Human being with feelings
 
inthepipeline's Avatar
 
Join Date: Mar 2007
Location: Bristol, UK. Slowly sinking island next to mainland Europe
Posts: 542
Default

Oops! Plus one Plus One Plus One

+++1
__________________
10core Xeon w.128gig RAM, lots of SSD, HDSP9652, MOTU828, Tannoy System 8 NFM.
inthepipeline is offline   Reply With Quote
Old 06-12-2008, 09:29 AM   #31
Cybolic
Human being with feelings
 
Cybolic's Avatar
 
Join Date: May 2007
Location: Copenhagen, Denmark
Posts: 407
Default

Great mockup, I'd go with Lawrence's version (and the additional tweaks by airon and Tallisman)

++1
Cybolic is offline   Reply With Quote
Old 06-12-2008, 11:16 AM   #32
Alex Stone
Human being with feelings
 
Alex Stone's Avatar
 
Join Date: Jul 2007
Location: Reaper Fine Arts Department
Posts: 1,607
Default

And with my, by now infamous and usual position on these things,
if we could navigate round this with keystrokes as well as the wretched rodent, it would be appreciated. (should this excellent idea come to fruition.)


Alex.

__________________
www.openoctave.org
Alex Stone is offline   Reply With Quote
Old 06-12-2008, 11:44 AM   #33
xackley
Human being with feelings
 
Join Date: Feb 2007
Location: Kitchen table, next to frig
Posts: 1,179
Default

And there should be an MCU option to automaticly switch the controller focus to the sliders and buttons on the I/O dialog.

And a Tack in the corner to toggle whether it auto closes.
__________________
^^^^^^^^^^
https://soundcloud.com/user-463176271
xackley is offline   Reply With Quote
Old 06-12-2008, 12:17 PM   #34
Lawrence
Human being with feelings
 
Join Date: Mar 2007
Posts: 21,551
Default

Quote:
Originally Posted by xackley View Post
And there should be an MCU option to automaticly switch the controller focus to the sliders and buttons on the I/O dialog.
Hmmm... never thought of that. Passing the routing mixer's functions to a control surface channel by channel, it's sends and receives. Good one.

+1

Quote:
And a Tack in the corner to toggle whether it auto closes.
+1

= +2?

Last edited by Lawrence; 06-12-2008 at 12:23 PM.
Lawrence is offline   Reply With Quote
Old 06-12-2008, 01:02 PM   #35
Lawrence
Human being with feelings
 
Join Date: Mar 2007
Posts: 21,551
Default

Quote:
Originally Posted by Tallisman View Post
I believe that any tweaking of this window needs to incorporate a drop-down menu for all configured sends and receives, such that we can quickly re-assign a send/receive without losing the configuration settings.



.t
Damn, that's a good idea. I'd like to see that in the current window scheme.
Lawrence is offline   Reply With Quote
Old 06-12-2008, 02:48 PM   #36
airon
Human being with feelings
 
airon's Avatar
 
Join Date: Aug 2006
Location: Berlin
Posts: 11,817
Default

Nice idea Tallisman.

Now where is WhiteTie to give it a bit of polish and consistent design ?

Xackley, this context switching of control surfaces would be very cool, and hopefully it won't stop there. Custom mixer setups could indeed be great for large scale mixes. Mixer Sets, like the screen sets ?

I also agree with Inthepipeline about having the automation controls on the MCP. Perhaps all these elements will some day be optionable to be displayed on the mixer strips.

And now, what about cloning sends in this window ? You'd clone one then change the destination (or source on the receives). CTRL+click on the label seems like a the best choice, because ALT+click deletes sends in the mixer and therefore should do so here as well, and SHIFT+click mutes a send and should do so here as well.

The I/O window should behave like the mixer window, and could thus also have the option to create multiple rows of mixer strips.

In all what we have here is a master section on the left(or right) and the mixer strips for the sends and receives. Any control surface controls whatever mixer is selected, be it an I/O window of a track, the mixer window or a future custom mixer window, which the existing MCP is a specialized version of.

Tracks, sends, receives, audio hardware outputs, midi hardware outputs, and later VCA faders(probably only on the MCP/custom mixer) are the elements Reaper could use to build mixing views.
__________________
Using Latch Preview (Video) - Faderport 16 setup for CSI 1.1 , CSI 3.10
Website
"My ego comes pre-shrunk" - Randy Thom

Last edited by airon; 06-12-2008 at 03:09 PM.
airon is offline   Reply With Quote
Old 06-13-2008, 06:35 AM   #37
Cableaddict
Human being with feelings
 
Join Date: Apr 2008
Posts: 1,910
Default

Go dogs, go!

Several good ideas here. I'm +1 for ANYTHING that will get rid of the needless visual clutter. - And there's plenty to get rid of.

Another possibility:

Any send, slider, or other routing tidbit that is at zero, or otherwise not being used, should grey-out. It would lie dormant, and would become colored only when tweaked & set to a "used" condition.

(I'd still MUCH rather have separate tracks, but I guess that's a tired old tune around here.)

Last edited by Cableaddict; 06-13-2008 at 06:39 AM.
Cableaddict is offline   Reply With Quote
Old 06-27-2008, 04:19 AM   #38
airon
Human being with feelings
 
airon's Avatar
 
Join Date: Aug 2006
Location: Berlin
Posts: 11,817
Default

Ok, here's an update to this idea. Some cleanup and moved buttons. See what you think:

__________________
Using Latch Preview (Video) - Faderport 16 setup for CSI 1.1 , CSI 3.10
Website
"My ego comes pre-shrunk" - Randy Thom

Last edited by airon; 06-27-2008 at 04:24 AM.
airon is offline   Reply With Quote
Old 06-27-2008, 10:03 AM   #39
Jack Winter
Human being with feelings
 
Jack Winter's Avatar
 
Join Date: Aug 2007
Location: Luxembourg/Spain
Posts: 1,922
Default

i'll repeat my request to use the existing interface of the MCP for sends, recieves and hardware outs. We all know how it looks and works. Just open another mixer, or use the existing one with a different wiev. Imho the best solution...
__________________
Reaper for Linux Documentation (WIP). Software: Archlinux/KDE, Fabfilter FX, Komplete 8, Nebula, Schwa/Stillwell, T-racks Max/Amplitube/SVX, etc. Gear: i7-2600k/4700HQ/16GB, RME Multiface/Babyface, Behringer X32, Genelec 8040, etc. :)
Jack Winter is offline   Reply With Quote
Old 06-27-2008, 10:13 AM   #40
Alex Stone
Human being with feelings
 
Alex Stone's Avatar
 
Join Date: Jul 2007
Location: Reaper Fine Arts Department
Posts: 1,607
Default

Airon,
The latest incarnation gets my vote.

Superb idea.


Alex.
__________________
www.openoctave.org
Alex Stone is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 11:23 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.