10-14-2018, 04:50 AM | #81 |
Human being with feelings
Join Date: Aug 2007
Location: Luxembourg/Spain
Posts: 1,922
|
Yes and no. This is embarrassing but I suppose having said X, I'll have to admit to Y..
I can't for the life of me get Waves Central running in wine. I've tried many different wine versions, including the wine-staging 2.21 mentioned in the LinVst readme file, I've installed the needed overrides and robocopy. I've tried both on the intel as well as on the nvidia gpu, etc. This is quite annoying as there are reports of people running it without problems :S It gets as far as creating the main windows and then nothing more. What I did manage to install and run without any apparent problems was a warez version of Waves... <red face> In fact this seems to be the pattern of several of the bigger plugin suits, the plugins work just fine, but the installation program creates problems. Native Access also is causing problems. It gets as far as downloading an .iso or zip file and then it crashes, but you can install the plugins by manually mounting and installing the downloaded file. Though so far my NI stuff comes from Komplete8 and was installed from DVD. IK multimedia, fabfilter, etc on the other hand both install and registers the plugins without any problems at all. Like I mentioned I did get the melodyne plugin installed when I was on vacation a month or two ago. Just did some quick tests and it appeared to work fine, but I haven't used it yet in a bigger project. I do use wine-rt functionality which is a patch for wine I created ages ago, but the functionality is in wine-staging too, maybe this helps as it allows windows programs to set a high priority on a thread.
__________________
Reaper for Linux Documentation (WIP). Software: Archlinux/KDE, Fabfilter FX, Komplete 8, Nebula, Schwa/Stillwell, T-racks Max/Amplitube/SVX, etc. Gear: i7-2600k/4700HQ/16GB, RME Multiface/Babyface, Behringer X32, Genelec 8040, etc. :) |
10-14-2018, 04:58 AM | #82 |
Human being with feelings
Join Date: Aug 2007
Location: Luxembourg/Spain
Posts: 1,922
|
Maybe we should try to restrain ourselves a little bit regarding wine discussions in this thread as it is about native plugins?
From me a few final words on the subject though. A lot of windows plugins work and they work quite well, that said not at a level that is needed for professional work, if this is your case my recommendation is to either use the relatively few native plugins, or run OSX/Windows. Still my/our/the hope is that the linux plugin market will take off and a lot of plugins will be ported, or that we can create technical solutions that allow running windows plugins efficiently without any hassles.
__________________
Reaper for Linux Documentation (WIP). Software: Archlinux/KDE, Fabfilter FX, Komplete 8, Nebula, Schwa/Stillwell, T-racks Max/Amplitube/SVX, etc. Gear: i7-2600k/4700HQ/16GB, RME Multiface/Babyface, Behringer X32, Genelec 8040, etc. :) Last edited by Jack Winter; 10-14-2018 at 05:06 AM. |
10-14-2018, 10:39 AM | #83 |
Human being with feelings
Join Date: Aug 2011
Location: Near a big lake
Posts: 3,943
|
Agreed! Back on the subject of native Linux plugins...
MrElwood's MotherComp JS plugin is great! I'd mentioned DynEQ previously on the thread but MotherComp is new. JS plugins are filling a gap for native Linux plugins, at least with Reaper. |
10-14-2018, 11:37 AM | #84 | |
Human being with feelings
Join Date: Mar 2008
Location: Planet Earth
Posts: 9,098
|
Quote:
|
|
10-14-2018, 01:01 PM | #85 | |
Human being with feelings
Join Date: Aug 2011
Location: Near a big lake
Posts: 3,943
|
Quote:
As for Sky, I haven't tried it much yet. The amount of CPU it takes is no problem for me (even if it were double the current amount), since it's only going to be used in a single instance on the master. |
|
10-14-2018, 01:25 PM | #86 | |
Human being with feelings
Join Date: Mar 2008
Location: Planet Earth
Posts: 9,098
|
Quote:
That said, when I started making the Sun rise in that plugin, a really nice edge started happening that was not like just adding high frequency EQ. I don't know what the algorithm is that's being used, but it caught my ear right away. |
|
10-14-2018, 02:54 PM | #87 | ||
Human being with feelings
Join Date: Aug 2011
Location: Near a big lake
Posts: 3,943
|
Quote:
Some plugins' parameters can make glitching and it's not necessarily due to the CPU usage. It depends on the code, what a knob or slider is really doing. Quote:
Code:
// Includes code from Tilt EQ by Liteon I'm sure it's not just the Tilt EQ copied/pasted in there, but tilt EQ is quite useful so you might be appreciating its effect irrespective of anything else the plugin is doing. In that case, just use the Tilt EQ in Reaper on those tracks and save Sky for the master. Plugins like tilt EQ, presence EQ, graphic EQ etc. can be some of the most useful plugins despite how overlooked they are. It's good to have a toolbox with a lot of different and seemingly simple tools. Speaking of adding pleasing high end (and having a toolbox of useful plugins), you'd probably like Righteous4 by Airwindows. You have to learn how to use it first though (and the default settings are the worst possible ones). |
||
10-14-2018, 03:51 PM | #88 | |
Human being with feelings
Join Date: Mar 2008
Location: Planet Earth
Posts: 9,098
|
Quote:
|
|
10-17-2018, 05:53 AM | #89 |
Human being with feelings
Join Date: Dec 2010
Posts: 3,826
|
So does all this Steinberg acting like whiney little bitches over the VST2 SDK stuff mean that there will be no new native Linux VST ?
__________________
Stop posting huge images, smaller images or thumbnail, it's not rocket science! |
10-17-2018, 11:48 AM | #90 |
Human being with feelings
Join Date: Mar 2017
Posts: 861
|
I have 5 U-he vst3i and vst3 plugins in linux reaper at this time,
so I doubt moving away from vst2 means a hindrance to the creation of more native linux plugins. Coders can choose what they make, and what they use to make it. Are there some specific issues or products you're concered with? Cheers https://www.kvraudio.com/plugins/lin...undware/newest http://cdm.link/2017/03/steinberg-br...x-good-things/ https://sdk.steinberg.net/viewtopic.php?f=4&t=282 https://forum.cockos.com/showthread.php?t=209414 Last edited by 4duhwinnn; 10-17-2018 at 12:01 PM. Reason: mow |
10-21-2018, 12:57 PM | #91 |
Human being with feelings
Join Date: Dec 2010
Posts: 3,826
|
Nevermind, obviously mislead by people saying there is no native Linux VST3
__________________
Stop posting huge images, smaller images or thumbnail, it's not rocket science! |
10-22-2018, 12:47 PM | #92 | |
Human being with feelings
Join Date: Oct 2018
Posts: 125
|
Quote:
https://raw.githubusercontent.com/mi...screenshot.png https://github.com/michaelwillis/dra...ases/tag/0.9.4 |
|
10-22-2018, 01:04 PM | #93 | |
Human being with feelings
Join Date: Mar 2008
Location: Planet Earth
Posts: 9,098
|
Quote:
Last edited by Glennbo; 10-23-2018 at 05:48 PM. |
|
10-22-2018, 01:26 PM | #94 |
Human being with feelings
Join Date: Aug 2011
Location: Near a big lake
Posts: 3,943
|
Thank you, Michael! This is an excellent reverb plugin and I'll be using it often.
|
10-22-2018, 03:04 PM | #95 | |
Human being with feelings
Join Date: Oct 2018
Posts: 125
|
Quote:
I would really like feedback on how appropriate the settings are on the presets. I mostly just adapted the ones from Hibiki, but then I made a few up. In particular, I'm wondering if the "Acoustic Studio", "Electric Studio", and/or "Piano Studio" are a good match for their names. Of course I would love to hear any music that people make using Dragonfly; I'm open to a lot of styles, from orchestral to folk to jazz to modern rock... except for super heavy angry stuff. |
|
10-22-2018, 08:22 PM | #96 |
Human being with feelings
Join Date: Aug 2011
Location: Near a big lake
Posts: 3,943
|
I've tried all the plugins in the Freeverb3 package (the latest version) as Windows VST before I migrated to Linux. You somehow made the Hibiki sound good to me. Maybe I wasn't patient enough with it, or you just made an interface that made it a lot easier for me to find sounds I like.
I thought the ProG was great though at the time. Again, the interface...ugh. Once I figured out what it was meant to do (it has overlap, and some of the functions require reading to realize what they are), I got some really good sounds from it. If you're looking to tackle another reverb plugin, maybe a version of the ProG...? So far I've just tested some of your room sounds for adding ambience to drum channels, plus a large hall sound for a "really long reverb" kind of sound (with a bunch of editing). It's not the densest reverb sound but it's still good for that kind of thing. The controls are pretty intuitive; it didn't take me long to get what I wanted from the plugin. I can't help you too much with info about those specific presets you mentioned, because I'm on the other end of the spectrum...the end that you hate. I certainly don't have a piano here. Although it's possible at some point I'll add synth piano to something I do. |
10-22-2018, 10:06 PM | #97 |
Human being with feelings
Join Date: Aug 2011
Location: Near a big lake
Posts: 3,943
|
Dragonfly won't save any parameters settings in a preset, other than the room type. This also happens if I try to save what I've made as an FXP file, then load it.
Also: none of the settings will store in a Reaper FX chain. (I figured I should mention this because sometimes if a plugin has problems recalling a change in parameters from a preset, it will actually work if it were saved as part of an FX chain in Reaper.) |
10-23-2018, 07:24 AM | #98 | |||
Human being with feelings
Join Date: Oct 2018
Posts: 125
|
Quote:
Quote:
Quote:
Anyway, maybe that was more than you cared to know, but I'll try to carve out some time to fix it some time this week. I'm trying to resolve all of these kinds of issues and get a release that I feel good about calling "version 1.0.0". |
|||
10-23-2018, 07:31 AM | #99 |
Human being with feelings
Join Date: Mar 2008
Location: Planet Earth
Posts: 9,098
|
Call it "Anisoptera"!
|
10-23-2018, 08:26 AM | #100 |
Human being with feelings
Join Date: Oct 2018
Posts: 125
|
Haha... yeah, I was thinking of staying with that kind of theme, although my ideas were "Odonata" or "Damselfly" ... I kind of like Damselfly, it would sort of indicates that it's Dragonfly's more slender cousin, but then I wasn't sure that I wanted to constrain the naming convention that much.
|
10-23-2018, 12:16 PM | #101 |
Human being with feelings
Join Date: Aug 2011
Location: Near a big lake
Posts: 3,943
|
Actually I find it very interesting, thanks for elaborating!
I take no offense at anyone's musical tastes. Mine are varied enough. When I play a guitar or bass however I seem to fall back to a comfort zone of "the heavies" (thrash mostly). I hate naming things too. Every name has already been used for something else, and naming conventions (trying to stay consistent within a theme) are so easy to break when you add "one too many" products to a line for the naming convention you'd decided on. There are always more names within a convention you can use, but some you just want to avoid because they just don't sound right or have negative connotations. Dragonflies are alright by me! They gobble up mosquitos and they do it with approximately 95% success (based on how many attempts it takes to catch and kill their prey). Efficient mosquito killers are my friends. |
10-23-2018, 12:40 PM | #102 |
Human being with feelings
Join Date: Nov 2013
Posts: 2,818
|
You should have seen me this summer with an electric "tennis racket" and a slapper thing, you would have been proud of me.
Even a SmajjL can be provoked enough.
__________________
|
10-25-2018, 10:23 AM | #103 |
Human being with feelings
Join Date: Sep 2018
Location: Colorado
Posts: 429
|
When you don't have Plugin that you want....
Lets re-look at a great quote
"The Enemy of Art is the absence of Limitations" - Orson Welles To me this is a deep deep quote. Some analogies: would a 'rich' artist paint with peanut butter and dirt? Probably not! but a poor artist probably would... SO the Rich artist will never know the incredible things that poor artist found while painting with peanut butter and dirt. GOOD LESSON IMO. If you don't have a Melodyne or Audition or Spectral Wave editor NO Problem. Use your creativity. What if run this sound through this free synth, through a speaker (yea its a beat up free speaker (so why not rip the cone with a knife and etc.) and some how try to figure out how to manage a pitch problem that no one has ever come up with? I would rather hear that than something off of autotune. Is a guitar note off pitch? Tune the guitar. try again. You can't get a vocal clip into the right pitch or tone? Figure out WHY it does not sound right. Run it through 'SONIC VISUALZER' yes its free and works great. and put it in pitch through Reaper or Audacity or other way. Einstein said YOU CAN FIND ANY ANSWER by a correctly constructed question. And he went on to say it is so simple. When the question is then correctly analyzed you will find the answer in the question you constructed. Almost too easy huh? IMO the key is 'CORRECTLY CONSTRUCTED QUESTION' that is where the work is... What is the purpose in the first place? Is it poor me ... if I only had Melodyne and $1000 pc then I could make money or be a star. OR is it to come up with music that all modern programs CAN NOT DO. No amount money can buy it. Its your experience your knowledge. A Neumann mic can not do what a $3 sony mic can do? It never will. (It can't even come close) I have seen people go right by the sweet spot on a guitar. I have seen people go right by a perfect mic for recording an artist. All that was needed was that the mic should have been 7" from vocalist not 6". And it should of had a 6 db bump at 5k hz and a high pass filter set at 252 hertz. They probably will never see it. They say this mic sucx and toss it. A car might run bad with the timing just 1 or 2 degrees off. In fact by not having a timing gun or the like. You can find out the place where your car will run better than at factory specs. It is a fine small 'sweet spot'. Music is similar. Put a speaker and mic in a tile box and you analog REVERB. That is cool. (Adjustable too!) I recently tried to get some quasi low-fi recording on a vocal. I was trying to sample a small vocal clip at small bit rate. I found an open source program... after a simple 10 sec mod and poof had it!! 1.1 and 1.3 bits sounded wrong. Only at the rate of 1.2 bit it sounded good. Took a while and I went by it many many times but when I heard the correct rate I knew I found what I was looking for. At one point I was interested at how the JS OZZIFIER plug in worked. I heard something special in that plugin. For my vocal it was a bit over the top (over ozzified) and a tad off on the harmonics I wanted. I just recorded the voice with JS OZZIFIER. Then put it on a spectral analyzer (SONIC VISUALIZER) and got to see what the Plugin was doing to the voice. BINGO it was EQing (adding decibels) to certain harmonic or melodic bands of the frequency... increasing overtone harmonizing so-to-speak. I did not have Melodyne or AutoTune. SO... I manually played around with an EQ I liked, notched it and made my own sound. I am so glad I did not have Adobe Audition or program like that. What I learned from that experience was indispensable to me! In fact I just had too use a minimal band or 2 db increase and a band or 2 decrease; much less than what the ozzifier plugin used. Great posts above. keep on inspiring... s wave |
10-25-2018, 09:00 PM | #104 | |
Human being with feelings
Join Date: Oct 2018
Posts: 125
|
Quote:
Could one or two of you spot check my new release on Reaper? https://github.com/michaelwillis/dra...ases/tag/0.9.5 |
|
10-25-2018, 09:39 PM | #105 |
Human being with feelings
Join Date: Aug 2011
Location: Near a big lake
Posts: 3,943
|
Excellent! It's saving and recalling presets properly now. Thanks!
|
10-26-2018, 09:43 AM | #106 |
Human being with feelings
Join Date: May 2006
Location: State of California
Posts: 662
|
what folder?
This is a dumb question, but where is the folder that Reaper uses in Linux for VSTs? In other words, where should I extract Dragonfly to?
Thanks.
__________________
One thing led to another and somehow I ended up on Linux. https://guitarsophist.com/ |
10-26-2018, 09:49 AM | #107 | |
Human being with feelings
Join Date: Mar 2008
Location: Planet Earth
Posts: 9,098
|
Quote:
/home/YOUR_USER_NAME/.vst |
|
10-26-2018, 01:04 PM | #108 |
Human being with feelings
Join Date: Oct 2018
Posts: 125
|
|
10-26-2018, 01:11 PM | #109 |
Human being with feelings
Join Date: Mar 2008
Location: Planet Earth
Posts: 9,098
|
I did a quick test and it works here too.
|
10-26-2018, 04:00 PM | #110 |
Human being with feelings
Join Date: May 2006
Location: State of California
Posts: 662
|
Well, Reaper's path turned out to be this:
/home/ogden/Documents/Reaper/reaper_linux_x86_64/REAPER/Plugins/FX I tried putting the Dragonfly vst there and rescanning but Reaper can't see it. So I tried creating /home/ogden/.vst and putting it there, which does seem to be where Reaper expects it because the path is already in preferences, but even after a couple of rescans, Reaper can't see it. I'm puzzled, which often happens in Linux. Linux Mint MATE, by the way.
__________________
One thing led to another and somehow I ended up on Linux. https://guitarsophist.com/ |
10-26-2018, 04:24 PM | #111 |
Human being with feelings
Join Date: Aug 2011
Location: Near a big lake
Posts: 3,943
|
That's Reaper's directory for its own included plugins (ReaSuite). Don't put any plugins in there.
Go to your options, preferences, plugins, VST and look at the VST paths. There's one by default specified. You can either use that, or add another path. I chose to add a path which isn't a hidden ".whatever" directory, and I put it in my documents folder. Avoid system folders, in any case. You don't want to be messing with permissions. You'll need to know how to do this for some plugins like DrumGizmo VST (for instance) since it will intall (from KXStudio repo) into a different folder (in my case it was usr/lib/vst). So for that plugin, I added that path to my VST paths in preferences (rather than moving the plugin, because if it updates I'd like to leave it where it was installed). |
10-26-2018, 05:12 PM | #112 |
Human being with feelings
Join Date: May 2006
Location: State of California
Posts: 662
|
Yes, the folder I created, .vst, is in the path that Reaper has already set in preferences. It should work. But it doesn't.
__________________
One thing led to another and somehow I ended up on Linux. https://guitarsophist.com/ |
10-26-2018, 05:44 PM | #113 | |
Human being with feelings
Join Date: Mar 2008
Location: Planet Earth
Posts: 9,098
|
Quote:
If yes, try doing a clear cache and rescan in REAPER. |
|
10-26-2018, 05:55 PM | #114 |
Human being with feelings
Join Date: Aug 2011
Location: Near a big lake
Posts: 3,943
|
Yeah I hadn't noticed the second part of your post for some reason, about your creating a new path...oops.
Since you created that ".vst" folder, maybe remove the "." and then change that in the path info in preferences as well. The "." means it's hidden. I've noticed Reaper doesn't seem to be able to find hidden folders in Media Explorer etc., so maybe that's why. |
10-26-2018, 07:07 PM | #115 |
Human being with feelings
Join Date: May 2006
Location: State of California
Posts: 662
|
Yes, I did unpack it. I tried it first in a folder that was not hidden, and put the path to it in preferences, but that did not work either. I am at a loss.
__________________
One thing led to another and somehow I ended up on Linux. https://guitarsophist.com/ |
10-26-2018, 07:29 PM | #116 |
Human being with feelings
Join Date: Aug 2011
Location: Near a big lake
Posts: 3,943
|
When I put the "DragonflyReverb-vst.so" file in my vst folder, that's all I put in there. I left the other files in the archive (then deleted the archive). Perhaps having all those files in the vst folder has something to do with it (if you extracted all of them to your vst folder).
|
10-26-2018, 07:40 PM | #117 |
Human being with feelings
Join Date: May 2006
Location: State of California
Posts: 662
|
Ok, I deleted the other files. Still no go.
__________________
One thing led to another and somehow I ended up on Linux. https://guitarsophist.com/ |
10-26-2018, 07:44 PM | #118 |
Human being with feelings
Join Date: Aug 2011
Location: Near a big lake
Posts: 3,943
|
Try another clear cache/re-scan if you haven't.
Also you can edit your reaper-vstplugins64.ini file which has the plugin info, and remove references to Dragonfly in the file. Another thought: perhaps the download was corrupt. Whenever that's happened to me it's caught me by surprise. Try downloading again. Beyond that I'm at a loss. |
10-26-2018, 08:26 PM | #119 |
Human being with feelings
Join Date: Oct 2018
Posts: 125
|
Stringer, just to be clear, you need to put the DragonflyReverb-vst.so file directly inside of the folder where Reaper is looking for plugins, it will not work if you keep the DragonflyReverb folder as it comes out of the tgz archive. Please try copying DragonflyReverb-vst.so such that it exists in both of these locations:
/home/ogden/Documents/Reaper/reaper_linux_x86_64/REAPER/Plugins/FX/DragonflyReverb-vst.so /home/ogden/.vst/DragonflyReverb-vst.so (Not that it has to exist in both places, but hopefully reaper will find it in at least one of them) As mentioned above, the LV2 isn't used by reaper, it is a different plug-in format used by other DAWs. If that doesn't work, does Reaper have some way for you tell it to scan specific folders for plugins? I have had people successfully use dragonfly reverb in reaper on all three operating systems, but I don't know much about how to set it up. Edit: after looking at your messages again, it seems like you already understood most or all of this. Last edited by Michael Willis; 10-26-2018 at 08:37 PM. |
10-26-2018, 08:29 PM | #120 | |
Human being with feelings
Join Date: Mar 2008
Location: Planet Earth
Posts: 9,098
|
Quote:
|
|
Thread Tools | |
Display Modes | |
|
|