05-28-2019, 09:51 AM | #1 |
Human being with feelings
Join Date: May 2019
Posts: 11
|
insert delay for realtime AV sync
Hi all,
I need to add a realtime audio delay and then output the audio to sync with a video signal in OBS and then send it through the HDMI out of the pc. Can this be done with Reaper? TIA |
05-29-2019, 04:19 AM | #2 |
Human being with feelings
Join Date: May 2019
Posts: 11
|
I just found a prog "VB-audio" that creates virtual input/output to connect Reaper with OBS.
So I only need Reaper or a VST plugin to add a delay to the incoming audio, let's say about +450ms ... |
05-29-2019, 04:58 AM | #3 |
Human being with feelings
Join Date: Jun 2013
Location: Krefeld, Germany
Posts: 14,787
|
There are lots of plugins that provide a delay. E.g. ReaDelay comes with Reaper.
-Michael |
05-29-2019, 06:29 AM | #4 |
Human being with feelings
Join Date: May 2019
Posts: 11
|
Maybe there is a misunderstanding on the term "delay". I don't want to add a delay to obtain some echo effect like ReaDelay does.
The "delay" I want is more a time alignment thing: i.e. 1500ms of delay: I say "One" on a mic and instead of immediately hearing "One" on the output, I want a silence of 1500 ms and then I can hear the non-processed sound "One"... |
05-29-2019, 06:39 AM | #5 |
Human being with feelings
Join Date: Apr 2013
Posts: 699
|
__________________
Reaper/Studio One Pro/Win10Pro x64 i7-6700@3.8Ghz/32G/43" 4K/UMC1820 Event PS8/KKS61MK2/Maschine MK3/K12U |
05-29-2019, 07:05 AM | #6 |
Human being with feelings
Join Date: May 2019
Posts: 11
|
Thank you.
Good, but it seems not perfect for this use: for example if I put an extreme value like 2000ms, just to detect well the delay, and say one only word, I get the initial 2s silence followed by the word, BUT after another 2s I can hear at a very low volume, another instance of the word... like an echo. What I want is only a retard of the sound, like a buffer of the input sound delayed on time to be heared then unaltered. One program that do this, but not precisely on ms only fractions of seconds, is "radio delay": https://www.daansystems.com/radiodelay/ I would like the same result with ms on Reaper. |
05-29-2019, 12:28 PM | #7 |
Human being with feelings
Join Date: Jun 2013
Location: Krefeld, Germany
Posts: 14,787
|
ReaDelay with feedback and dry = 0 does exactly this.
But there are several delay JSFX plugins as well. maybe in the stock collection but definitively in ReaPack. -Michael |
05-30-2019, 07:40 AM | #8 |
Human being with feelings
Join Date: May 2019
Posts: 11
|
I'm no audio expert, I'm trying this but not getting the result...
My config: x32 connected with USB, in mode 2/2 this Routing: Input: Aux 1-2 = Card1-2 CardOut: P16 1-8 P16: 02 = DirOut ch1 prefader My Mic on ch1 In Reaper: I have a track with Input mono from ch2, EDIT Record: Output, Monitor:Input. Then I press Fx button and add FX ReaDelay and set it: Wet=0 ,Feedback=0 and Length (time) = 2000ms Well, the audio in earphones is realtime without delay from mic and after 2s I hear also the same audio echoed plus at infinite the same sound reapeating... So, total fail... Please, tell me what I make wrong. Last edited by frank10; 05-30-2019 at 07:48 AM. |
05-30-2019, 07:57 AM | #9 |
Human being with feelings
Join Date: May 2019
Posts: 11
|
Instead I solved with Voxengo, thank you Bobf!
The low volume sound delayed I previously heard was the delayed sound on my earphones near to the mic, captured by the mic and re-delayed... You can't monitor this thing, you set it and it will work, period. I'm still curious on ReaDelay... |
06-11-2019, 09:37 AM | #10 |
Human being with feelings
Join Date: Dec 2012
Posts: 7,295
|
Gotta be careful with numbers. In ReaDelay, a gain slider displaying 0 means 0db means unity gain. You want Dry and Feedback set to “-inf”. Then it should do exactly what you want.
__________________
Lorenzo's Tractor is Everywhere --- Ash's Tube --- Join the Partnership for a Drum Free Amerika |
06-11-2019, 02:07 PM | #11 |
Human being with feelings
Join Date: Jun 2013
Location: Krefeld, Germany
Posts: 14,787
|
Supposedly ReaPack -> Dual Time adjustment +/- delay is most exactly controllable: just type the numbers in msecs or samples (and view in meters)
-Michael |
06-12-2019, 07:15 AM | #12 |
Human being with feelings
Join Date: May 2019
Posts: 11
|
Thank you, I missed that!
I had to put both at -inf and now it works! |
Thread Tools | |
Display Modes | |
|
|