Go Back   Cockos Incorporated Forums > Other Software Discussion > OSCII-bot forum

Reply
 
Thread Tools Display Modes
Old 03-08-2021, 07:11 AM   #1
theeighth
Human being with feelings
 
Join Date: Aug 2019
Posts: 21
Default OSCII-Bot working but Reaper won't receive any commands

Hello.

I've been using AKAI MidiMix with Reaper via OSCII-Bot (thanks to goldenarpharazon and his config https://forum.cockos.com/showpost.ph...21&postcount=1) from time to time but a few days ago I noticed that it's not working anymore. Kinda.
I had a problem with it yesterday - until I rebooted my system and then the surface started to work.
Today it's not working again. And reboot had not fixed the problem this time.

Okay, so, what do I have:
Mac OS Catalina 10.15.7,
OSCII-Bot 0.6
MidiMix, connected to my Mac via USB cable.

First of all, let me say that cable is okay and working, USB-port is okay and working, OSCII-Bot is okay too (I even installed oscii-bot logger provided by Darkstar here: https://forum.cockos.com/showthread.php?t=210001) and it's showing all incoming commands from the control surface. I've also got ports open (just in case) but...REAPER is silent. It does not receive any messages. OSC port listening window is white, no signs of life of osc-device inside of REAPER.

So. What should I do in this situation? Any thoughts?
theeighth is offline   Reply With Quote
Old 03-08-2021, 01:56 PM   #2
goldenarpharazon
Human being with feelings
 
Join Date: Feb 2016
Posts: 189
Default

A likely explanation is that the IP address of your Mac has changed since you last used it. The script and the Reaper setup and the IP address all need to be in line with one another otherwise the OSC will not work and Reaper will not respond to the hardware.

Most home IP addresses are dynamically allocated so can change so check this is all in line first.

Good luck
goldenarpharazon is offline   Reply With Quote
Old 03-09-2021, 09:28 AM   #3
theeighth
Human being with feelings
 
Join Date: Aug 2019
Posts: 21
Default

Quote:
Originally Posted by goldenarpharazon View Post
A likely explanation is that the IP address of your Mac has changed since you last used it. The script and the Reaper setup and the IP address all need to be in line with one another otherwise the OSC will not work and Reaper will not respond to the hardware.

Most home IP addresses are dynamically allocated so can change so check this is all in line first.

Good luck
Well, good guess but unfortunately the IP hasn't changed because it's static and I wrote the right address in the config file. As I wrote before - MidiMix worked as usual just a couple of days ago.

The interesting part though is that oscii-bot tells me this:

Code:
Attached to already-opened device 'MIDI Mix'
Attached to already-opened listener 'localhost:9000'
So...I guess the listener is opened by oscii-bot logger but what opened the control surface?
theeighth is offline   Reply With Quote
Old 03-10-2021, 03:22 AM   #4
goldenarpharazon
Human being with feelings
 
Join Date: Feb 2016
Posts: 189
Default

From a clean OSCII-bot start each time, check one by one all combinations of

1) Running the logging script only
2) Running the MIDIMIX script only
3) Running both the logging script and MIDIMIX script together

For combination 3) both scripts use the same @OUTPUT and @INPUT so there is likely to be some contention so perhaps cause the error messages seen. Using the "OMNI" devices to open in the logging script instead could resolve. [see OSCII-bot documentation for this]
goldenarpharazon is offline   Reply With Quote
Old 03-16-2021, 10:57 AM   #5
theeighth
Human being with feelings
 
Join Date: Aug 2019
Posts: 21
Default

Quote:
Originally Posted by goldenarpharazon View Post
1) Running the logging script only
This works


Quote:
Originally Posted by goldenarpharazon View Post
2) Running the MIDIMIX script only
This doesn't work. Except that I see the button addresses in the bottom left corner of oscii-bot window when I do something with midimix .

Quote:
Originally Posted by goldenarpharazon View Post
3) Running both the logging script and MIDIMIX script together
Same as before - I see the log but midimix does nothing in REAPER (and yes, the device is configured in REAPER).


Quote:
Originally Posted by goldenarpharazon View Post
For combination 3) both scripts use the same @OUTPUT and @INPUT so there is likely to be some contention so perhaps cause the error messages seen. Using the "OMNI" devices to open in the logging script instead could resolve. [see OSCII-bot documentation for this]
Well, there is no such thing as "@OUTPUT" in logging script, but I noticed that there are differences between how the @INPUT is wrote. In MIDIMix script it looks like "@input in MIDI "Mix" and "@input OSC_IN OSC "localhost:9000" but in logging script it looks like "@input HW_IN MIDI "Mix" and "@input HOST_IN OSC "localhost:9000". I've tried to change "@input OSC_IN OSC" for "@input HOST_IN OSC" in the Midimix script but that doesn't improve anything either. Very, very sad situation.

I still cannot understand what could cause a problem with that device and why it just doesn't want to work properly as it worked before. I haven't change anything in its script before the problem occurred. And I understand that there is something wrong with it because, well, the logging in midimix script doesn't work too. Unfortunately, I don't have much time for studying documentation too so I guess that Ill have to forget about it for some time. This is sad too cause I'd like to use that device since it saves my worktime.

From what I understand, Midimix script still gets midi from midimix itself and sends commands to REAPER, but REAPER does not receive them. I even tried to reset my REAPER config but still no luck.

Last edited by theeighth; 03-16-2021 at 08:46 PM.
theeighth is offline   Reply With Quote
Old 03-16-2021, 01:54 PM   #6
mschnell
Human being with feelings
 
mschnell's Avatar
 
Join Date: Jun 2013
Location: Krefeld, Germany
Posts: 14,686
Default

What kind of "commands" ?

How exactly do you suppose Reaper should get and be aware of such commands ?
-Michael
mschnell is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 11:06 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.