Available on
Stash
DETAILS:
Built from
LCS_BlueCore, that was based on the
LCS_Blue rebuild of
White Tie's "Dead Ringer" layout for
Imperial (R4) .
The Theme and Theme Adjuster are based on the default for Reaper v6.12c
COLOR FADERS: Blue, Green, and Yellow fader layouts available for the MCP & TCP, but you will need to use the
RTConfig_ColorFaders.txt included in the downloaded Zip file.
Rename it to
rtconfig.txt and copy it to the theme's image folder.
Let it overwrite the existing file.
additional instructions:
- give the modified theme a different name, such as :
LCS_BlueTone-6_Faders.ReaperThemeZip
- load the modified theme in Reaper and open the theme tweaker.
- click the browse button in the bottom right and navigate to the modified theme
- click OK
- click the
Save button in the top right of the theme tweaker and let it overwrite the theme.
- reload the theme.
----------------------
PLEASE NOTE:The Mods are only for the 100% version.
The 150 and 200 size layouts have been removed.
----------------------
INSTRUCTIONS:
unpack the zip file and copy the '
LCS_BlueTone-6.ReaperThemeZip' file in your '
Reaper/ColorThemes' folder
NOTE: to use this theme with the Theme Adjuster, copy the
LCS_BlueTone-6_theme_adjuster file and image folder into the
Reaper/Scripts folder.
This theme has new layouts in addition the layouts found in the default 6 theme.
New Layouts:
-
BIG METER: Larger meter for default and narrow modes
-
THIN: Thinner than Narrow mode layouts, but has a bigger meter
-
RED FADERS: Red fader layouts available for the MCP & TCP
-
SEPARATORS: 3 for the MCP and 1 for the TCP
-
STRIPS: Strip a, B or C use the same Theme Adjuster settings as the
A,
B or
C layouts.
-
STRIP A, B or C: pull layout up for more buttons and controls
-
Label: minimal buttons. pull layout up for larger label
-
Meter: minimal buttons. pull layout up for larger meter
KNOWN ISSUES:
Number scale on the meters for the Thin and Strip layouts can be enabled and disabled from the Theme Adjuster, but you need to refresh the track for the change to appear.
This can be done by closing and re-opening the Mixer, changing the height of the track or reloading the theme.
Hoping to find a fix for this soon.
------------------------
UPDATE: 09/07/2021
- changed Toolbar buttons to have better symbol clarity
- changed Toolbar buttons to have better contrast between the ON and OFF states
UPDATE: 10/01/2020
- added new TCP FX & send images
UPDATE: 08/22/2020
- replaced ENVCP images with default 6 images
- fixed several bugs in the Transport section
- added 2 new Transport layouts that have the Rate knob and readout removed
UPDATE: 08/19/2020
- fixed MCP End Folder arrow position for Thin and VCA layouts
------------------------
::