I assume the usb to midi cable shows up as an output midi device…
In options/preferences/midi devices:
Right click on the output midi device and select “send clock to output”
Create a track 1
Routing: select the midi cable as midi device under midi hardware output
I make this a midi track and put my midi sequence on it. I believe i also use it to start a pattern on the volca but can’t remember.
Create a track 2
Select focusrite as audio input device
Select output - audio mono or stereo
Arm track 2 and record.
Once done recording unselect “send clock to output”
It’s been a while since i’ve done this with my volcas; hope i am not missing anything. It really has been a long time so i might be confused whether the volcas accept clock or not. I have the volca drum and keys.
I know for sure i have set the bpm on the drum to match reaper - synced the drum to the keys to drive its bpm and then recorded one and then the other into reaper.
I seem to also recall syncing them to reaper. I’ll try it again when i get a chance. Best i can tell googling is that it does work but midi sync on the volca should be set to auto, which should be default.
Last edited by b2001; 04-21-2022 at 04:25 PM.
|