|
|
|
12-07-2019, 11:41 PM
|
#1
|
Human being with feelings
Join Date: Nov 2019
Posts: 44
|
How to deal with hearing clean sound on top of fx sound
I noticed that I can hear my electric guitar's clean sound at the same time as my fx effects. At first I assumed that I was just hearing the guitar itself but now I know that I'm hearing both through my studio monitors. I'm using a scarlett solo.
Anyone know how I can deal with this issue? When I toggle direct monitoring on and off it seems to lesson it but not eliminate it...or at least it seems that way.
any thoughts on this?
|
|
|
12-08-2019, 09:14 AM
|
#2
|
Human being with feelings
Join Date: Jan 2017
Posts: 84
|
Quote:
Originally Posted by beginnerplayer666
I noticed that I can hear my electric guitar's clean sound at the same time as my fx effects. At first I assumed that I was just hearing the guitar itself but now I know that I'm hearing both through my studio monitors. I'm using a scarlett solo.
Anyone know how I can deal with this issue? When I toggle direct monitoring on and off it seems to lesson it but not eliminate it...or at least it seems that way.
any thoughts on this?
|
Do you by any chance have the "Direct Monitor" (or whatever it's called on your interface) button/switch engaged? If so, the interface is routing your input signal to your phones/monitors as well as to Reaper.
|
|
|
12-08-2019, 09:35 AM
|
#3
|
Human being with feelings
Join Date: May 2017
Posts: 642
|
I've had the same issue. Don't know what was causing it but when I switched my guitar pickup to a single rather than the double setting it seemed to stop the issue
|
|
|
12-08-2019, 01:41 PM
|
#4
|
Human being with feelings
Join Date: Nov 2019
Posts: 44
|
ok this all makes sense now. turning off direct monitoring minimized the issue....but then switching to using one pickup instead of two eliminated it completely...well as far as I can tell. problem solved for me. but I'm just using reaper for guitar practice for now. I haven't started recording anything yet.
|
|
|
12-08-2019, 01:50 PM
|
#5
|
Human being with feelings
Join Date: Aug 2014
Posts: 11,044
|
The number of pickups you're using shouldn't make any difference.
What effects are you using? Plugins? A hardware effects box?
With some plugins they expect a mono input, but REAPER always gives them a stereo input unless you change the track I/O. This ends up with the left channel being effected and the right channel passing clean.
|
|
|
12-08-2019, 02:42 PM
|
#6
|
Human being with feelings
Join Date: Nov 2019
Posts: 44
|
Quote:
Originally Posted by Judders
The number of pickups you're using shouldn't make any difference.
What effects are you using? Plugins? A hardware effects box?
With some plugins they expect a mono input, but REAPER always gives them a stereo input unless you change the track I/O. This ends up with the left channel being effected and the right channel passing clean.
|
https://imgur.com/3oXcm2a
|
|
|
12-08-2019, 02:50 PM
|
#7
|
Human being with feelings
Join Date: Aug 2014
Posts: 11,044
|
Quote:
Originally Posted by beginnerplayer666
|
Okay, I've not had that problem with Ignite Emissary, but it's worth a shot anyway.
On the Emissary plugin, click where it says 2 in / 2 out (between Param and UI buttons), try setting both inputs to channel 1, or just turn off channel 2:
My guess is that switching to one pickup instead of two just makes it less audible. Direct monitoring will always bring the clean signal through, but if you're still hearing the clean guitar with direct monitoring off then something else is awry.
|
|
|
12-08-2019, 04:13 PM
|
#8
|
Human being with feelings
Join Date: Nov 2019
Posts: 44
|
Quote:
Originally Posted by Judders
Okay, I've not had that problem with Ignite Emissary, but it's worth a shot anyway.
On the Emissary plugin, click where it says 2 in / 2 out (between Param and UI buttons), try setting both inputs to channel 1, or just turn off channel 2:
My guess is that switching to one pickup instead of two just makes it less audible. Direct monitoring will always bring the clean signal through, but if you're still hearing the clean guitar with direct monitoring off then something else is awry.
|
Well, i guess after switching off direct monitoring, still hearing the clean sound was either in my head or I was hearing directly from the strings to my ears(as apposed to strings, through audio interface, through DAW, through monitors to my ears).
How I just came to this conclusion is that I recorded myself doing a riff with direct monitoring off, then on, then off again...then I just listened through my monitors and could hear the difference. When direct monitoring is off, it doesn't record my clean sound, and the tone sounds better. I did this using both my pickups.
Hope what I just said makes sense.
Also I adjusted the settings like you said and it made it sound even better, which is a plus.
|
|
|
12-08-2019, 04:15 PM
|
#9
|
Human being with feelings
Join Date: Aug 2014
Posts: 11,044
|
Quote:
Originally Posted by beginnerplayer666
Well, i guess after switching off direct monitoring, still hearing the clean sound was either in my head or I was hearing directly from the strings to my ears(as apposed to strings, through audio interface, through DAW, through monitors to my ears).
How I just came to this conclusion is that I recorded myself doing a riff with direct monitoring off, then on, then off again...then I just listened through my monitors and could hear the difference. When direct monitoring is off, it doesn't record my clean sound, and the tone sounds better. I did this using both my pickups.
Hope what I just said makes sense.
Also I adjusted the settings like you said and it made it sound even better, which is a plus.
|
It's easy for our ears to play tricks on us!
|
|
|
12-08-2019, 08:04 PM
|
#10
|
Human being with feelings
Join Date: Nov 2019
Posts: 44
|
Quote:
Originally Posted by Judders
It's easy for our ears to play tricks on us!
|
haha yeah.
|
|
|
03-09-2024, 10:57 PM
|
#11
|
Human being with feelings
Join Date: Mar 2024
Posts: 4
|
Quote:
Originally Posted by beginnerplayer666
|
I'm sorry to resurrect an old thread but I'm having this exact same issue (new to Reaper).
"With some plugins they expect a mono input, but REAPER always gives them a stereo input unless you change the track I/O. This ends up with the left channel being effected and the right channel passing clean."
Where exactly do you do this?
I'm also having this problem when routing a dry input signal to an FX chain track. Once I do that and pan the input (guitar) track, I lose the effect and have the dry signal.
Could that be solved somewhere on the attached image?
Last edited by Tattersail Nightwish; 03-09-2024 at 11:09 PM.
Reason: addition
|
|
|
03-10-2024, 05:18 AM
|
#12
|
Human being with feelings
Join Date: Aug 2023
Posts: 325
|
In your screenshot, what you can do is to in the topmost line change "send to master" from "All" to channel 1.
For plugins which demand a mono input you can change the plugin IO in the plugin window itself:
Press the button where (in this case) it says "1 in+out", which should bring up a window like this:
Here make sure only one channel goes into the plugin.
|
|
|
03-10-2024, 11:51 AM
|
#13
|
Human being with feelings
Join Date: Jul 2009
Location: Oregon
Posts: 615
|
Put the fx on a separate buss, route the track to the buss, select pre-fader, and pull the fader on the track all the way down.
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 01:59 AM.
|