04-23-2018, 11:11 AM | #201 |
Mortal
Join Date: Jan 2006
Location: Wickenburg, Arizona
Posts: 14,051
|
This was the point, to give us at the very least, the type of control we had back in the stone aged 1980's.
You can really just about come up with any combination you want and switch it, including setting custom fade in and fade out times |
04-23-2018, 04:17 PM | #202 |
Mortal
Join Date: Jan 2006
Location: Wickenburg, Arizona
Posts: 14,051
|
How can i get MIDI CC's to the master fader so I can set up a volume pedal o nthe output?
|
04-23-2018, 09:15 PM | #203 |
Human being with feelings
Join Date: Jun 2013
Location: Krefeld, Germany
Posts: 14,785
|
While this should be possible by a ReaScript, maybe you also could use Midi Fade in the Master effect chain (I did not try to find out how to route Midi Messages to the Master Effect Chain, though.)
-Michael |
04-27-2018, 11:11 PM | #204 |
Human being with feelings
Join Date: Dec 2016
Posts: 96
|
So I just had an idea right now when sorting out how I would work spillover and the fact that I’m trying to avoid muting and unmuting. Is there a way that we can have multiple delay channels? That way we can just set up different timers for how long we want the delay to keep going when we switch
|
04-27-2018, 11:39 PM | #205 |
Human being with feelings
Join Date: Jun 2013
Location: Krefeld, Germany
Posts: 14,785
|
With a setup based on Midi Table and Midi Fade X, the only point in using mutin / unmuting channels is saving CPU for unused channels, as the audio of same is muted by Midi Fader X, anyway.
So "avoid" is the "native" stage, while "doing" gets on top of the setup, to be more secure from clicks and dropouts due to CPU overload. -Michael Last edited by mschnell; 04-28-2018 at 02:45 PM. |
04-28-2018, 11:24 AM | #206 |
Mortal
Join Date: Jan 2006
Location: Wickenburg, Arizona
Posts: 14,051
|
I would love a way to switch routing, it would work for what you are looking for and also for instances where I want the same basic track, but want it router or not to different tracks
You could almost do it from sws live's input track, but that only works for one basic track |
04-28-2018, 02:47 PM | #207 |
Human being with feelings
Join Date: Jun 2013
Location: Krefeld, Germany
Posts: 14,785
|
Sorry, but I have no idea what you mean here, and what you are referring to.
-Michael |
04-30-2018, 12:29 PM | #208 |
Mortal
Join Date: Jan 2006
Location: Wickenburg, Arizona
Posts: 14,051
|
I think I could actually do it with MIDI CC Table
Most of my patches use the same basic sound, so I'd like to say have three basic tones 1. clean 2. distorted 3. REALLY distorted The variations after that would be individual effects that run in series or parallel with one of these three sounds. What I'd like to do is first be able to pick which of these 3 I'd like to send to first, and then switch routings to various channels with FX on them, without switching away from the basic sound that its already on SWS Live doesnt seem to be able to do this, but I think I can find a way to do it with MIDI CC table, I'll give it a try today |
04-30-2018, 12:44 PM | #209 |
Human being with feelings
Join Date: Jun 2013
Location: Krefeld, Germany
Posts: 14,785
|
I'm rather sure you can.
Enough instances of Midi Fade X will prevent any need for switching of routing. -Michael |
05-10-2018, 12:59 AM | #210 |
Mortal
Join Date: Jan 2006
Location: Wickenburg, Arizona
Posts: 14,051
|
It just occurred to me that MIDI CC Table could be used to create snapshots like on the helix
|
05-10-2018, 01:36 AM | #211 |
Mortal
Join Date: Jan 2006
Location: Wickenburg, Arizona
Posts: 14,051
|
I need to switch in and out a parallel path, I could do it on the same channel or a different channel, and I'll need to switch VSTs in and out, what do you think a safe way to do that would be?
|
05-10-2018, 10:50 AM | #212 |
Mortal
Join Date: Jan 2006
Location: Wickenburg, Arizona
Posts: 14,051
|
Did the wah auto engage ever make it to reapack? I cant find it
|
05-13-2018, 03:44 PM | #213 |
Human being with feelings
Join Date: Jun 2013
Location: Krefeld, Germany
Posts: 14,785
|
Yep. It's called "Midi Auto Engage"
-Michael |
05-29-2018, 11:35 PM | #214 |
Human being with feelings
Join Date: Dec 2016
Posts: 96
|
That’s pretty much exactly what I’m doing. You can map any parameter to a cc. So dividing the parameter value into 127 you can set any parameter at one cc command. One let’s change the tonestack controls, power amp gain, preamp gain, reverb mix and noise gate threshold all at the same time with one footswitch click. Lmfao the power of this plugin is amazing. The only thing I’m fiddling with now is configuring reverb/delay tails
|
05-29-2018, 11:43 PM | #215 |
Human being with feelings
Join Date: Dec 2016
Posts: 96
|
At this point I’m trying to decide if I need the flexibility to turn off individual plugins independently of midi cc table or if I can make do by just presenting 10 snapshots and using my guitar vol knob
|
05-30-2018, 12:03 AM | #216 |
Mortal
Join Date: Jan 2006
Location: Wickenburg, Arizona
Posts: 14,051
|
Combine it with LBX Stripper and you can have both
|
Thread Tools | |
Display Modes | |
|
|