Go Back   Cockos Incorporated Forums > REAPER Forums > MIDI Hardware, Control Surfaces, and OSC

Reply
 
Thread Tools Display Modes
Old 03-08-2020, 03:40 PM   #921
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by Skadimusic View Post
Hi Moss,

first off thank you for your great efforts! It's good to have the SL MK3 implemented in Reaper (and other DAWs).

However, I have a quite annoying issue with Reaper using DrivenByMoss4Reaper. The pitchbend and mod wheel will not be routed to the (virtual) instruments I use. Aftertouch and other controls are routed as intended though. I used the Midi Monitor to check if the plugin actually receives those control messages and pitch/mod are both working as intended. Is there a special option I missed to get the pitchbend and mod wheel routed to the plugins?

I'm using Reaper 6.05, DrivenByMoss4Reaper 8.80 and the Novation SL MK3 FW 1.2/371 on Windows 10

Any help would be appreciated since it's a significant loss if pitch/mod is not available.

Thank you!
Ups, thanks for reporting! Will be fixed in the next udpate.
moss is offline   Reply With Quote
Old 03-08-2020, 03:43 PM   #922
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Version 8.91 is online!

Get it from http://mossgrabers.de
  • All devices
    • Fixed: Pitchbend and Modulation Wheels did not work.
  • Generic Flexi
    • New: Improved handling of Program Change as source. For trigger commands also a button up is executed; for continuous commands the value of the PC is sent (and not always replaced with 127).
    • New: Patch Bank Selection, see Generic Flexi documentation for more info. But this is currently not that helpful with Reaper since all settings are global.
  • Launchpad
    • New: Easier selection of note modes. Pressing the note button brings up a menu where you can directly select the note/sequencer mode. First row (from top) selects play modes, 3rd row drum modes and 5th row sequencer modes.
    • New: Changing note length does now also work in Poly Sequencer
    • New: Inverted back the clip/scene scroll direction (was also not conform with the LED lighting)
    • Fixed: Displaying longer notes did not work in Poly Sequencer
  • Maschine Mikro 3
    • Fixed: Removed restriction that drum octave could only be changed if a clip was active.
  • MCU
    • New: Group/Write Automation changed to trigger Latch automation
    • New: Support for Read/Trim automation mode
  • Push 1/2
    • New: Support for Read/Trim and Latch Preview automation modes
    • New: Inverted back the clip/scene scroll direction
    • New: Changing note length does now also work in Poly Sequencer
    • Fixed: Displaying longer notes did not work in Poly Sequencer

Enjoy!
moss is offline   Reply With Quote
Old 03-08-2020, 04:09 PM   #923
Skadimusic
Human being with feelings
 
Join Date: Mar 2020
Posts: 2
Thumbs up

Quote:
Originally Posted by moss View Post
Version 8.91 is online!

Get it from http://mossgrabers.de
  • All devices
    • Fixed: Pitchbend and Modulation Wheels did not work.
  • Generic Flexi
    • New: Improved handling of Program Change as source. For trigger commands also a button up is executed; for continuous commands the value of the PC is sent (and not always replaced with 127).
    • New: Patch Bank Selection, see Generic Flexi documentation for more info. But this is currently not that helpful with Reaper since all settings are global.
  • Launchpad
    • New: Easier selection of note modes. Pressing the note button brings up a menu where you can directly select the note/sequencer mode. First row (from top) selects play modes, 3rd row drum modes and 5th row sequencer modes.
    • New: Changing note length does now also work in Poly Sequencer
    • New: Inverted back the clip/scene scroll direction (was also not conform with the LED lighting)
    • Fixed: Displaying longer notes did not work in Poly Sequencer
  • Maschine Mikro 3
    • Fixed: Removed restriction that drum octave could only be changed if a clip was active.
  • MCU
    • New: Group/Write Automation changed to trigger Latch automation
    • New: Support for Read/Trim automation mode
  • Push 1/2
    • New: Support for Read/Trim and Latch Preview automation modes
    • New: Inverted back the clip/scene scroll direction
    • New: Changing note length does now also work in Poly Sequencer
    • Fixed: Displaying longer notes did not work in Poly Sequencer

Enjoy!
That was super fast! Pitchbend and Mod Wheel are working fine now!

Did you ever considered contacting Novation/Reaper for implementing this natively and or as official plugin? Your control plugin is just awesome and in many aspects better than the native support of the devices (particularily for the SL MK3 which is only well supported in Ableton Live natively - OK, Reason is also supported via a certrain Novation driver but its bad and very basic to be honest).
Skadimusic is offline   Reply With Quote
Old 03-11-2020, 03:20 PM   #924
Vincent Sermonne
Human being with feelings
 
Vincent Sermonne's Avatar
 
Join Date: Feb 2009
Location: Marseille France
Posts: 6,451
Default

I've had this message for a few days yet I haven't changed anything... well maybe the Windows update?

Code:
drivenbymoss: ERROR: Could not call startup.java.lang.ExceptionInInitializerError
edit: ah and even if the push is off!
__________________
Vincent
http://www.tchackpoum.fr
Vincent Sermonne is offline   Reply With Quote
Old 03-12-2020, 12:38 AM   #925
barbaroja
Human being with feelings
 
barbaroja's Avatar
 
Join Date: Jul 2009
Posts: 345
Default

Quote:
Originally Posted by moss View Post
Thanks for the video. Could you send me that project?

Some questions:
- which controllers did you add?
- does it also happen if you remove/deactivate all controllers?
- does it change anything if you deactivate the data updates in the Debug dialog?
- what are your computer specs?
Off course you can have the project

I added only push 2. I do have other controllers but they are not handled by your plugin.

Edit: 8.91 tested the same
Yes, it happens if I deactivate them.
Nope, keeps doing the same.
i7 9570H, 32GB RAM, 4TB Samsung EVO SSD, RTX260 6GB, TC Konnekt 48, Push 2.

Last edited by barbaroja; 03-12-2020 at 12:43 AM.
barbaroja is offline   Reply With Quote
Old 03-12-2020, 01:20 AM   #926
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by Vincent Sermonne View Post
I've had this message for a few days yet I haven't changed anything... well maybe the Windows update?

Code:
drivenbymoss: ERROR: Could not call startup.java.lang.ExceptionInInitializerError
edit: ah and even if the push is off!
Is there more text or is this the full error message? Can only guess that some files are mixed up. Clean the directory, download again and unzip.
moss is offline   Reply With Quote
Old 03-22-2020, 02:35 PM   #927
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by barbaroja View Post
Hi, Moss. I think I found the cause and made a quick video. Please watch it till the end. Sorry I did not have time to edit. I will post the link now, please give it some time to upload and process.

Edit: Sorry about some windows not showing in the video. OBS captured only reaper's main window but I think you can still get the point.
Thanks for the video, it helped a lot and I finally could reproduce it!
Should be fixed in 8.92.
moss is offline   Reply With Quote
Old 03-22-2020, 02:38 PM   #928
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

I just release version 8.92!

Get it from http://www.mossgrabers.de/
  • All devices
    • New: Added version information to Windows DLL
    • Fixed: Temporary freezes of the Reaper UI with heavy CPU plugins with lots of parameters
    • Fixed: Shutdown was not fully completed after JVM was stopped.
  • Launchpad
    • Fixed: Note selection was activated when coming from a non-note mode but should not.

Enjoy!
moss is offline   Reply With Quote
Old 03-22-2020, 02:39 PM   #929
themixtape
Human being with feelings
 
themixtape's Avatar
 
Join Date: Aug 2009
Posts: 899
Default

Moss, you're a GOD!!!!!!!!!!!!!! Thank you!!!!!!!!!
themixtape is offline   Reply With Quote
Old 03-22-2020, 03:07 PM   #930
themixtape
Human being with feelings
 
themixtape's Avatar
 
Join Date: Aug 2009
Posts: 899
Default

Experiencing very strange behavior. I open Reaper, with the updated files (deleted the old ones, unzipped the new ones)...

Nothing works with the SL MKIII, even with proper config.

When I go into the Config for DBM, it initially lets me configure stuff, but as soon as I close the Config window, and the window where it shows the "java-runtime" path.... as soon as that closes, it shows "Please start Reaper" on my SL MKIII, and my Push 2.

When I go back into the Control Surfaces config, it is empty... whereas before it says java-runtime.. it deleted itself and then nothing works.

Bizarre.

LiceCAP: http://chriscaulder.net/midi/DBM892.gif

Experiencing the same exact behavior with a fresh install of Reaper 6.05 with the temporary license. Same exact. I'm on Windows 7, 64-bit, 32gb ram. Everything has worked perfect up to now... all versions of DBM worked (even with all the lag with the previous 8.00+ versions). Not this.

It works until you go into the Configuration (note: DON'T, haha). But, I'm still experiencing lag/freezing with Poise and some of the other previously-mentioned plugins. Back to 7.05, yet again. Hope you can resolve the weird java disconnection thing, Jurgen! Thanks!

Last edited by themixtape; 03-22-2020 at 04:27 PM.
themixtape is offline   Reply With Quote
Old 03-23-2020, 12:55 AM   #931
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by themixtape View Post
Experiencing very strange behavior. I open Reaper, with the updated files (deleted the old ones, unzipped the new ones)...

Nothing works with the SL MKIII, even with proper config.

When I go into the Config for DBM, it initially lets me configure stuff, but as soon as I close the Config window, and the window where it shows the "java-runtime" path.... as soon as that closes, it shows "Please start Reaper" on my SL MKIII, and my Push 2.

When I go back into the Control Surfaces config, it is empty... whereas before it says java-runtime.. it deleted itself and then nothing works.

Bizarre.

LiceCAP: http://chriscaulder.net/midi/DBM892.gif

Experiencing the same exact behavior with a fresh install of Reaper 6.05 with the temporary license. Same exact. I'm on Windows 7, 64-bit, 32gb ram. Everything has worked perfect up to now... all versions of DBM worked (even with all the lag with the previous 8.00+ versions). Not this.

It works until you go into the Configuration (note: DON'T, haha). But, I'm still experiencing lag/freezing with Poise and some of the other previously-mentioned plugins. Back to 7.05, yet again. Hope you can resolve the weird java disconnection thing, Jurgen! Thanks!
Yes, that's ugly. I did not find a nice solution for that so far. Don't confirm the dialog, press cancel instead.
moss is offline   Reply With Quote
Old 03-23-2020, 01:22 PM   #932
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

I released 8.93 which fixes the configuration dialog problem above.

Get it from http://mossgrabers.de
moss is offline   Reply With Quote
Old 03-23-2020, 02:51 PM   #933
timzibrat
Human being with feelings
 
Join Date: Jan 2019
Location: Ljubljana, Slovenia
Posts: 29
Default

I'm sure I must have done something wrong somewhere, since reaper crashes every time I try to add my novation sl mk3. Any suggestions how to quickly fix this? I tried a portable install and a system restart and reaper's still crashing.
timzibrat is offline   Reply With Quote
Old 03-23-2020, 05:33 PM   #934
Tamas Lorincz
Human being with feelings
 
Join Date: Jan 2017
Location: Budapest
Posts: 2
Default

Hey guys!

Plugins - Compatibility - Disable saving full plug-in state

Anyone tried this before?

In this case everything works like charm, the lag completely goes away on my config (Reaper 6.05, MacOS 10.03, DrivenByMoss4Reaper-8.91), check out the video:

https://www.youtube.com/watch?v=-sH6zyEgCZE

Just don't forget to turn it BACK OFF before saving the project!


And - of course - thanks for the great developing work and fantastic support for Moss!!!
Tamas Lorincz is offline   Reply With Quote
Old 03-24-2020, 03:48 AM   #935
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by timzibrat View Post
I'm sure I must have done something wrong somewhere, since reaper crashes every time I try to add my novation sl mk3. Any suggestions how to quickly fix this? I tried a portable install and a system restart and reaper's still crashing.
Some more information would be helpful:
- What OS are you on?
- Are you using the latest releases of Reaper and DrivenByMoss?
- When does it crash exactly? When you add the extension or when you add the SL mk3?
moss is offline   Reply With Quote
Old 03-24-2020, 03:49 AM   #936
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by Tamas Lorincz View Post
Hey guys!

Plugins - Compatibility - Disable saving full plug-in state

Anyone tried this before?

In this case everything works like charm, the lag completely goes away on my config (Reaper 6.05, MacOS 10.03, DrivenByMoss4Reaper-8.91), check out the video:

https://www.youtube.com/watch?v=-sH6zyEgCZE

Just don't forget to turn it BACK OFF before saving the project!


And - of course - thanks for the great developing work and fantastic support for Moss!!!
Try 8.93, which (hopefully) fixes the issue.
moss is offline   Reply With Quote
Old 03-24-2020, 04:01 AM   #937
timzibrat
Human being with feelings
 
Join Date: Jan 2019
Location: Ljubljana, Slovenia
Posts: 29
Default

Quote:
Originally Posted by moss View Post
Some more information would be helpful:
- What OS are you on?
- Are you using the latest releases of Reaper and DrivenByMoss?
- When does it crash exactly? When you add the extension or when you add the SL mk3?
Yeah sorry:
- Windows 10 Build 18363
- I'm using Reaper v6.05 and dbm 8.93
- it crashes when I try to add the SL mk3. So I can still open the control surface settings and then configure. It does seem weird though, since there seems to be a problem with some loading. The Log say: "Loading device INI files from C:\Users\Tim Zibrat\AppData\Roaming\REAPER ..." and it stays this way, so no further dialogs.
timzibrat is offline   Reply With Quote
Old 03-24-2020, 04:12 AM   #938
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by timzibrat View Post
Yeah sorry:
- Windows 10 Build 18363
- I'm using Reaper v6.05 and dbm 8.93
- it crashes when I try to add the SL mk3. So I can still open the control surface settings and then configure. It does seem weird though, since there seems to be a problem with some loading. The Log say: "Loading device INI files from C:\Users\Tim Zibrat\AppData\Roaming\REAPER ..." and it stays this way, so no further dialogs.
So, it does not crash but freeze? There was another report about a problem with INI files farther above. Try to delete(or move) the DrivenByMoss4Reaper*.config files in the folder named in the log.
moss is offline   Reply With Quote
Old 03-24-2020, 04:16 AM   #939
timzibrat
Human being with feelings
 
Join Date: Jan 2019
Location: Ljubljana, Slovenia
Posts: 29
Default

Quote:
Originally Posted by moss View Post
So, it does not crash but freeze? There was another report about a problem with INI files farther above. Try to delete(or move) the DrivenByMoss4Reaper*.config files in the folder named in the log.
No, sorry. It crashes completely and instantly once I click add and select the device. Before that it stays with this one log message and nothing happens. Will check the INI problem and report back, thanks.
timzibrat is offline   Reply With Quote
Old 03-24-2020, 07:24 AM   #940
timzibrat
Human being with feelings
 
Join Date: Jan 2019
Location: Ljubljana, Slovenia
Posts: 29
Default

Deleting the .config files didn't help. A clean portable version of Reaper doesn't crash, so I need to check what's happening with my main setup in reaper.
timzibrat is offline   Reply With Quote
Old 03-24-2020, 11:28 AM   #941
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by timzibrat View Post
Deleting the .config files didn't help. A clean portable version of Reaper doesn't crash, so I need to check what's happening with my main setup in reaper.
Just gave it a spin to be sure and it works fine for me.
moss is offline   Reply With Quote
Old 03-24-2020, 11:29 AM   #942
themixtape
Human being with feelings
 
themixtape's Avatar
 
Join Date: Aug 2009
Posts: 899
Default

Quote:
Originally Posted by moss View Post
I released 8.93 which fixes the configuration dialog problem above.

Get it from http://mossgrabers.de
Thanks, Jurgen!
themixtape is offline   Reply With Quote
Old 03-24-2020, 12:03 PM   #943
themixtape
Human being with feelings
 
themixtape's Avatar
 
Join Date: Aug 2009
Posts: 899
Default

Quote:
Originally Posted by Tamas Lorincz View Post
Hey guys!

Plugins - Compatibility - Disable saving full plug-in state

Anyone tried this before?

In this case everything works like charm, the lag completely goes away on my config (Reaper 6.05, MacOS 10.03, DrivenByMoss4Reaper-8.91), check out the video:

https://www.youtube.com/watch?v=-sH6zyEgCZE

Just don't forget to turn it BACK OFF before saving the project!


And - of course - thanks for the great developing work and fantastic support for Moss!!!
This sounds like a brilliant fix! I'll try it!
themixtape is offline   Reply With Quote
Old 03-24-2020, 02:35 PM   #944
Tamas Lorincz
Human being with feelings
 
Join Date: Jan 2017
Location: Budapest
Posts: 2
Default

Quote:
Originally Posted by moss View Post
Try 8.93, which (hopefully) fixes the issue.
Correct, v8.93 fixed the lag issue!

FYI: noticed minor bugs with Komplete Kontrol keyboard (MK2 S49, v0.5.9):
-First button can't select, solo or mute the actual track in mixer mode
-Button of the master track doesn't lit while pressing Solo or Mute buttons

Thanks again!
Tamas Lorincz is offline   Reply With Quote
Old 03-24-2020, 03:02 PM   #945
themixtape
Human being with feelings
 
themixtape's Avatar
 
Join Date: Aug 2009
Posts: 899
Default

FINALLY the lag is fixed with 8.92. and more importantly, 8.93 doesn't remove the plugin when hitting "ok.".

The "Disable saving full plug-in state" thing is also a LIFESAVER!!! I never thought about that. Perfect performance with GURU and Poise is great, too. No weird glitchies.

The Arturia V-Collection and the Analog Lab 4 stuff is solid, too. NO lag with the Maxtrix-12 or the other heavy synths. NONE (and that's without disabling the plugin save state).

Again, as the previous person mentioned-- UNTICK THE BOX BEFORE YOU SAVE AND CLOSE REAPER!!!

I'm thinking of adding a Project Setting note-- "Disable plugin save state" when starting a new project" and having another note "re-enable before saving!" haha.

Wonderful.

Moss, YOU DID IT!!!!!!!! Nah, I spoke too soon! The step-sequencer is not working.

It seems like I'm getting weird behavior yet again! Using the step-sequencers (ANY type)... I can't add the notes unless recording them in real-time (and if I do, I can't DELETE the notes on the steps!). I cannot REMOVE the notes, either. You're supposed to be able to press a pad to insert a step (for the pad you last hit) and again to remove it from the step-sequence. This does not work but it still works perfectly with 7.05. Also, the Push 2 encoder (for Note Repeat) still skips 1/16 and 1/32 for the Length settings. Still! The Period setting catches all note divisions. The length does not. The buttons under the screen (for Length) cannot go past 1/8t (to 1/16 and beyond). Same problem as before. Nothing wrong with my Push 2.... thanks man!

Last edited by themixtape; 03-24-2020 at 08:53 PM.
themixtape is offline   Reply With Quote
Old 03-24-2020, 05:37 PM   #946
barbaroja
Human being with feelings
 
barbaroja's Avatar
 
Join Date: Jul 2009
Posts: 345
Default

Quote:
Originally Posted by moss View Post
Thanks for the video, it helped a lot and I finally could reproduce it!
Should be fixed in 8.92.
Great! Glad to help!

Could you explain that behavior a bit? Even if I don't understand it completely, would be nice to.
barbaroja is offline   Reply With Quote
Old 03-25-2020, 02:44 AM   #947
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by barbaroja View Post
Great! Glad to help!

Could you explain that behavior a bit? Even if I don't understand it completely, would be nice to.
As I suspected from the start it was the reading of the track chunk, which caused the freeze and the parameter reading was using a lot of string operations, which were also slow. The main problem was to get false user reports who said that disabling track/device reading does not change anything. Which was not true cause I could reproduce that quite easily following your steps in the video.

Ende gut alles gut :-)
moss is offline   Reply With Quote
Old 03-25-2020, 09:08 AM   #948
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by themixtape View Post
It seems like I'm getting weird behavior yet again! Using the step-sequencers (ANY type)... I can't add the notes unless recording them in real-time (and if I do, I can't DELETE the notes on the steps!). I cannot REMOVE the notes, either.
Argh, stupid bug I introduced cleaning up the code. Will be fixed in the next update.
moss is offline   Reply With Quote
Old 03-25-2020, 12:07 PM   #949
themixtape
Human being with feelings
 
themixtape's Avatar
 
Join Date: Aug 2009
Posts: 899
Default

Thanks, Jurgen! Any idea when we can expect the fix? Super excited to get this rolling finally.
themixtape is offline   Reply With Quote
Old 03-26-2020, 07:39 AM   #950
domportera
Human being with feelings
 
Join Date: Mar 2020
Posts: 14
Default

I'm having an issue where the Java VM path is totally blank and I have no ability to manually put it in. Any idea what my issue is? I'm on the latest 8.93
domportera is offline   Reply With Quote
Old 03-26-2020, 03:56 PM   #951
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by domportera View Post
I'm having an issue where the Java VM path is totally blank and I have no ability to manually put it in. Any idea what my issue is? I'm on the latest 8.93
That's OK, you do not have to enter it. It is displayed as soon it is running.
moss is offline   Reply With Quote
Old 03-26-2020, 03:57 PM   #952
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Version 8.94 is online!

Get it from http://mossgrabers.de
  • All devices
    • Fixed: Creating sequencer notes was broken
  • Generic Flexi
    • New: Commands to edit 64 user parameters (controls track fx parameters). See commands in new category User.
    • New: The MIDI channel for the keyboard (or pads if it is a pad controller) can be explicitly set (previously it was fixed to channel 1). It can also be turned off or set to all. If a MIDI note is mapped to a function on this MIDI channel, the note is blocked from being played. Note: If you have selected All for the channel the note is blocked on all channels!
    • New: Modulation Wheel (CC 01), Sustain Pedal (CC 64) and Pitchbend can now automatically be routed to Reaper. You can now turn them off individually if you want to map them to something else.
  • Launchpad
    • New: Option to remove the master track from the track bank (requires restart of extension).
    • New: Pro: Disabled Delete button if used without button combination to prevent accidential deletions.
    • New: Pro: Added user mode (controls track fx parameters). Press USER button to enter. Scene buttons switch between the 8 pages of 8 parameters.
  • OSC
    • New: Added user parameters (controls track fx parameters).
    • Fixed: Changing output server/port did still not work.
  • Push 1/2
    • New: Added User mode (controls track fx parameters). Allows to map 64 parameters. Press USER button to enter. Setup on Push 1 is now Shift+USER.

Enjoy!
moss is offline   Reply With Quote
Old 03-26-2020, 07:13 PM   #953
themixtape
Human being with feelings
 
themixtape's Avatar
 
Join Date: Aug 2009
Posts: 899
Default

Quote:
Originally Posted by moss View Post
Version 8.94 is online!

Get it from http://mossgrabers.de
  • All devices
    • Fixed: Creating sequencer notes was broken
  • Generic Flexi
    • New: Commands to edit 64 user parameters (controls track fx parameters). See commands in new category User.
    • New: The MIDI channel for the keyboard (or pads if it is a pad controller) can be explicitly set (previously it was fixed to channel 1). It can also be turned off or set to all. If a MIDI note is mapped to a function on this MIDI channel, the note is blocked from being played. Note: If you have selected All for the channel the note is blocked on all channels!
    • New: Modulation Wheel (CC 01), Sustain Pedal (CC 64) and Pitchbend can now automatically be routed to Reaper. You can now turn them off individually if you want to map them to something else.
  • Launchpad
    • New: Option to remove the master track from the track bank (requires restart of extension).
    • New: Pro: Disabled Delete button if used without button combination to prevent accidential deletions.
    • New: Pro: Added user mode (controls track fx parameters). Press USER button to enter. Scene buttons switch between the 8 pages of 8 parameters.
  • OSC
    • New: Added user parameters (controls track fx parameters).
    • Fixed: Changing output server/port did still not work.
  • Push 1/2
    • New: Added User mode (controls track fx parameters). Allows to map 64 parameters. Press USER button to enter. Setup on Push 1 is now Shift+USER.

Enjoy!
Thank you so much Jurgen but it is broken STILL... with the Clip View (Push 2), it doesn't show the notes on the screen (again, with 7.05, the notes on the screen are shown as they're put in... or when they're removed). Any idea? And Note Repeat Length is still skipping 1/16, 1/32, etc. Even when you set the touchstrip to be Length, it still skips. Skips with encoder, buttons, or the touchstrip. Not that Length is really important... Period (rate) is more useful, but still. Broken. Thank you, sir!!! We're almost there!!!

Another question I had-- how to I set up User Mode on Push 2? I can't seem to select any pages other than Page 1, and I have no idea how it's used... thanks!

Last edited by themixtape; 03-26-2020 at 07:35 PM.
themixtape is offline   Reply With Quote
Old 03-26-2020, 10:05 PM   #954
tdc
Human being with feelings
 
Join Date: Oct 2019
Location: Sydney
Posts: 374
Default

Hi Moss,

Thanks for creating this exciting looking extension for Reaper. I am keen to try it out but am not having any luck at the config stage.

The config screen appears but none of the buttons work. The Logging reports that it skipped two files that apparently are not present.

reaper-fxfolders.ini
reaper-jsfx.ini.

Any thoughts? Thanks
tdc is offline   Reply With Quote
Old 03-27-2020, 02:41 AM   #955
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by themixtape View Post
Thank you so much Jurgen but it is broken STILL... with the Clip View (Push 2), it doesn't show the notes on the screen (again, with 7.05, the notes on the screen are shown as they're put in... or when they're removed). Any idea? And Note Repeat Length is still skipping 1/16, 1/32, etc. Even when you set the touchstrip to be Length, it still skips. Skips with encoder, buttons, or the touchstrip. Not that Length is really important... Period (rate) is more useful, but still. Broken. Thank you, sir!!! We're almost there!!!
Thanks for testing, will check.


Quote:
Originally Posted by themixtape View Post
Another question I had-- how to I set up User Mode on Push 2? I can't seem to select any pages other than Page 1, and I have no idea how it's used... thanks!
The user mode automatically reflects the Track FX parameters, which you can configure in the Reaper Mixer. I will do a video about that during the weekened.
moss is offline   Reply With Quote
Old 03-27-2020, 02:46 AM   #956
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by tdc View Post
Hi Moss,

Thanks for creating this exciting looking extension for Reaper. I am keen to try it out but am not having any luck at the config stage.

The config screen appears but none of the buttons work. The Logging reports that it skipped two files that apparently are not present.

reaper-fxfolders.ini
reaper-jsfx.ini.

Any thoughts? Thanks
These warnings can be ignored. It just means you have not configured Folders in the device dialog.
On some platforms sometime the Reaper configure dialog blocks the DrivenByMoss configuration dialog. Try to close the dialogs in the background. You can also assign a key command to the DrivenByMoss configuration dialog.
moss is offline   Reply With Quote
Old 03-27-2020, 02:48 AM   #957
barbaroja
Human being with feelings
 
barbaroja's Avatar
 
Join Date: Jul 2009
Posts: 345
Default

Moss, when I hit new, on push 2... Is there a way to create the clip only with no auto recording start?

Thanks!
barbaroja is offline   Reply With Quote
Old 03-27-2020, 12:12 PM   #958
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by barbaroja View Post
Moss, when I hit new, on push 2... Is there a way to create the clip only with no auto recording start?

Thanks!
It is Shift+New but I noticed that it did also activate record. Will be fixed in the next update!
moss is offline   Reply With Quote
Old 03-27-2020, 12:52 PM   #959
themixtape
Human being with feelings
 
themixtape's Avatar
 
Join Date: Aug 2009
Posts: 899
Default

Hi Jurgen! Another weird thing I noticed is sometimes an effect is inserted in the Input FX, automatically, without me doing anything. It's the first effect in my list... in my case, JS Midi Arp or something. It just shows up in the Input FX on random tracks. Could be with the older version 8.93 or something but something to note.

Short list of weird behavior:

- Clip View (Push 2) not showing the notes, in a MIDI clip -- it shows the empty clip/grid, but no notes
- Note Repeat Length-- skips over 1/16 and 1/32 (but hits 1/16t, and 1/32t)... buttons, encoder or touchstrip all behave the same... skips every time
- Shift+New automatically records (as previous poster mentioned-- I never noticed this til now)
- Step-sequencer (Drum mode) sometimes when you light up a pad, it's off the standard 16th note grid... and then you can't erase it. Have no idea why... I think it's only in live record mode... but even when going out of record mode, the problem's still there. Can't remove the notes, or if you hit the same pad you're trying to erase, you'll light up a bunch of pads for the next steps (faint light, really light velocities). Really strange. A workaround is to just make sure your clip is not record-enabled (Shift+New helps, once that's fixed)

Thanks, man!

Last edited by themixtape; 03-27-2020 at 02:51 PM.
themixtape is offline   Reply With Quote
Old 03-27-2020, 01:07 PM   #960
moss
Human being with feelings
 
moss's Avatar
 
Join Date: Mar 2007
Location: Germany
Posts: 644
Default

Quote:
Originally Posted by themixtape View Post
Hi Jurgen! Another weird thing I noticed is sometimes an effect is insert in the Input FX, automatically, without me doing anything. It's the first effect in my list... in my case, JS Midi Arp or something. It just shows up in the Input FX on random tracks. Could be with the older version 8.93 or something but something to note.

Short list of weird behavior:

- input FX being inserted randomly
- Clip View (Push 2) not showing the notes, in a MIDI clip -- it shows the empty clip/grid, but no notes
- Note Repeat Length-- skips over 1/16 and 1/32 (but hits 1/16t, and 1/32t)... buttons, encoder or touchstrip all behave the same... skips every time
- Shift+New automatically records (as previous poster mentioned-- I never noticed this til now)
- Step-sequencer (Drum mode) sometimes when you light up a pad, it's off the standard 16th note grid... and then you can't erase it. Have no idea why... I think it's only in live record mode... but even when going out of record mode, the problem's still there. Can't remove the notes, or if you hit the same pad you're trying to erase, you'll light up a bunch of pads for the next steps (faint light, really light velocities). Really strange. A workaround is to just make sure your clip is not record-enabled (Shift+New helps, once that's fixed)

Thanks, man!
That's how note repeat is implemented! It facilitates a MIDI Arp which is inserted in the input FX...
Maybe that is why your note repeat length is not working because you tinkered with the settings?!
moss is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 07:06 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.