|
|
|
04-22-2020, 12:31 PM
|
#8681
|
Human being with feelings
Join Date: Apr 2020
Location: Scotland
Posts: 155
|
Quote:
Originally Posted by MixMonkey
...and a Mackie 8-Buss
|
And a Behringer X-Touch Universal...
__________________
Slainté, Grae
Mac mini M2 Pro [MacOS 13.5.2] | Reaper 7.11(ARM) | CSI (Exp) & DBM4R (Latest) | Behringer X-Touch (1.21)
|
|
|
04-22-2020, 12:37 PM
|
#8682
|
Human being with feelings
Join Date: Apr 2020
Location: Scotland
Posts: 155
|
Quote:
Originally Posted by rothchild
Afternoon,
I've set the 'Solo' button to toggle off all solos (Like Klinke) but with Klinke the red light above the button only comes on when there is a solo active, now I've added the item in 'Buttons' the light stays on all the time (regardless of solo state), can I make it go out if there are no solos active?
|
This is a symptom of 'stateless' actions in Reaper. Any button with a light that is defined as an action which doesn't have an on/off recognised by Reaper will stay on permanently and it's totally frustrating!
Something which you could try, if you have SWS Extensions installed, is creating a cycle action with If/Then/Else statements relating to the solo state of the channels and tie that to the solo button.
I'm looking to do the same thing but work has been crazy the last week or so so haven't had a chance to try and catch up with the thread never mind set up any are actions.
If I get anywhere at any point I'll let you know.
__________________
Slainté, Grae
Mac mini M2 Pro [MacOS 13.5.2] | Reaper 7.11(ARM) | CSI (Exp) & DBM4R (Latest) | Behringer X-Touch (1.21)
|
|
|
04-22-2020, 12:49 PM
|
#8683
|
Human being with feelings
Join Date: Apr 2019
Location: Inman, SC USA
Posts: 859
|
Quote:
Originally Posted by Cragster
hey mixmonkey and all.Im really having alot trouble setting up these 2 surfaces (one for main mixing 1 for just fx ) i dont know what im doing wrong i cant get both surfaces to work at the same time. i tried checking and unchecking all the CSI setup boxes..like sync pages and sync zones across surfaces and auto map fx . no matter what i do its either one surface or the other.so i have 2 pages set up in csi..one for the prox for main surface and one for the platform m which is what i want to use for fx. can anyone help me set this up ? what boxes do i check and uncheck for each ?? what should i have in each zone file and what shouldnt i have in each zone? i tried gopage but again its either one surface or the other. can 2 surfaces work together at the same time ? i know this is alot to ask im sry but ill include zones for each
Prox main zone - i took out the FX menu Zone from this and put it in the zone file for the platform
Code:
Zone Home
OnTrackSelection MapSelectedTrackSendsToWidgets
IncludedZones
"Buttons|"
"Channel|1-8"
"MasterChannel|"
IncludedZonesEnd
ZoneEnd
Zone "Buttons|"
Shift Shift
Option Option
Control Control
Alt Alt
Blank1 Reaper "_S&M_SHOWNOTESHELP" // NOTES WINDOW
Blank2 Reaper "40016" // PREFERENCES
Blank3 Reaper "40605" // ACTION LIST
Blank4 Reaper "40454" // EDIT VIEW
Blank5 Reaper "40455" // MIXER VIEW
Send ToggleMapSelectedTrackSends
Send Reaper "40293"
Pan Reaper "_dc1079a3ffd4a1438942a677566f9ed3" // FOLDER/CHILDRE
/Plugin ToggleMapSelectedTrackFXMenu
/Plugin Reaper "_S&M_TOGLFXCHAIN"
Shift+Plugin GoZone FocusedFXParameter
Option+Plugin GoPage FX
EQ GoPage Edit
ChannelLeft TrackBank "-1"
ChannelRight TrackBank "1"
BankLeft TrackBank "-8"
BankRight TrackBank "8"
TimeDisplay TimeDisplay
smpteBeats CycleTimeDisplayModes
Rewind Rewind
FastForward FastForward
Stop Stop
Play Play
Record Reaper "1013"
F1 Reaper "40495" // RECORD MONITOR MODE
F2 Reaper "40702" // CREATE NEW TRACK
F3 Reaper "40701" // CREATE NEW TRACK/INSERT VIRTUAL INSTRU
F4 Reaper "40005" // REMOVE TRACK
F5 Reaper "40062" // DUPLICATE TRACK
F6 Reaper "41817" // CONTINUOUS SCROLLING
F7 Reaper "40042" // GO TO START
F8 Reaper "40296" // SELECT ALL TRACKS
F1L2 Reaper "40293" // VIEW ROUTING/SENDS FOR SEL TRACK
F2L2 Reaper "1042" // FOLDER COLLAPSE STATE
F3L2 Reaper "_S&M_TOGLFXCHAIN" // SHOW FX WINDOW FOR SEL TRACK
F4L2 Reaper "_S&M_FXBYPSEL" // BYPASS FX FOR SEL TRACK
F5L2 Reaper "_S&M_SELFXNEXT" // NEXT FX FOR SEL TRACK
F6L2 Reaper "40344" // BYPASS FX FOR ALL TRACKS
F7L2 Reaper "40549" // SHOW FX ABOVE MIXER
F8L2 Reaper "_BR_NORMALIZE_LOUDNESS_ITEMS" // NORMALIZE
Read TrackAutoMode "1"
Shift+Read GlobalAutoMode "1"
Write TrackAutoMode "3"
Shift+Write GlobalAutoMode "3"
Trim TrackAutoMode "0"
Shift+Trim GlobalAutoMode "0"
Touch TrackAutoMode "2"
Shift+Touch GlobalAutoMode "2"
Latch TrackAutoMode "4"
Shift+Latch GlobalAutoMode "4"
Save Reaper "40026"
Shift+Save Reaper "40022" // SAVE PROJECT AS
Undo Reaper "40029"
Shift+Undo Reaper "40030" // REDO
Flip Reaper "40346"
Normal Reaper "40173" // GO TO NEXT MARKER
Marker Reaper "40157" // INSERT MARKER
Loop CycleTimeline
nameValue GoZone Home
Shift+nameValue GoPage Home
Click Reaper "40364" METRONOME
Solo Reaper "40340" // UNSOLO ALL TRACKS
Mode ToggleScrollLink 4
Zoom Reaper "40113" // ZOOM SEL TRACK
Up Reaper "40111" // ZOOM IN VERTICAL
Down Reaper "40112" // ZOOM OUT VERTICAL
Left Reaper "1011" // ZOOM OUT HORIZONTAL
Right Reaper "1012" // ZOOM IN HORIZONTAL
JogWheelRotaryCW Reaper "41667" // NORMAL JOG RIGHT
JogWheelRotaryCCW Reaper "41666" // NORMAL JOG LEFT
Shift+JogWheelRotaryCW Reaper "_SWS_MOVECUR5MSRIGHT" // SLOW JOG
Shift+JogWheelRotaryCCW Reaper "_SWS_MOVECUR5MSLEFT" // SLOW JOG
Control+JogWheelRotaryCW Reaper "40103" // CREATE JOG TIMESEL R
Control+JogWheelRotaryCCW Reaper "40102" // CREATE JOG TIMESEL L
/MasterFader MasterTrackVolume
ZoneEnd
Zone "Channel|"
TrackNavigator
VUMeter| TrackOutputMeterMaxPeakLR
/VUMeter| TrackOutputMeterAverageLR
DisplayUpper| TrackNameDisplay
DisplayLower| TrackPanDisplay
TrackTouch+DisplayLower| TrackVolumeDisplay
RotaryPush| GoZone PanWidth|
Rotary| TrackPan "0"
RecordArm| TrackRecordArm
Solo| TrackSolo
Mute| TrackMute
Select| TrackUniqueSelect
Shift+Select| TrackRangeSelect
Control+Select| TrackSelect
Shift+Control+Select| TogglePin
Option+Select| TrackFolderDive
Alt+Select| TrackUniqueSelect
Alt+Select| Reaper "41665"
Fader| TrackVolume
TrackTouch+Fader| TrackVolume
FaderTouch| TrackTouch
ZoneEnd
Zone "Pan|1-8"
TrackNavigator
Rotary| TrackPan "0"
RotaryPush| GoZone PanWidth|
ZoneEnd
Zone "PanWidth|1-8"
TrackNavigator
Rotary| TrackPanWidth "1"
RotaryPush| GoZone Pan|
ZoneEnd
Zone "Send|1-8"
SelectedTrackNavigator
DisplayUpper| TrackSendNameDisplay
TrackTouch+DisplayUpper| TrackSendVolumeDisplay
Mute| TrackSendMute
Fader| TrackSendVolume
Rotary| TrackSendPan
RotaryPush| NoAction
TrackTouch+Fader| TrackSendVolume
FaderTouch| TrackTouch
ZoneEnd
Zone "MasterChannel|"
MasterTrackNavigator
MasterChannelMeterLeft MasterTrackOutputMeter 0
MasterChannelMeterRight MasterTrackOutputMeter 1
MasterFader TrackVolume
MasterFaderTouch TrackTouch
ZoneEnd
And here is the platform M zone (this is the surface i want to use strictly for fx) in this one I took out the channel zone because i just want this for fx (and possibly sends) is this the right way ? and i dont know what boxes to check or uncheck on each page of the CSI setup.
Code:
Zone Home
OnTrackSelection MapSelectedTrackSendsToWidgets
OnTrackSelection MapSelectedTrackFXToMenu
IncludedZones
"Buttons|"
"MasterChannel|"
IncludedZonesEnd
ZoneEnd
Zone "Buttons|"
ChannelLeft TrackBank "-1"
ChannelRight TrackBank "1"
BankLeft TrackBank "-8"
BankRight TrackBank "8"
Read MapSelectedTrackFXMenu
Read Reaper "_S&M_TOGLFXCHAIN"
Write ToggleMapSelectedTrackSends
Write Reaper "40293"
Mixer GoPage Home
Loop NoAction
Rewind NoAction
FastForward NoAction
Stop NoAction
Play NoAction
Record NoAction
Zoom NoAction
JogWheelRotaryCW Reaper "41667" // NORMAL JOG RIGHT
JogWheelRotaryCCW Reaper "41666" // NORMAL JOG LEFT
Shift+JogWheelRotaryCW Reaper "_SWS_MOVECUR5MSRIGHT" // SLOW JO
Shift+JogWheelRotaryCCW Reaper "_SWS_MOVECUR5MSLEFT" // SLOW JO
Control+JogWheelRotaryCW Reaper "40103" // CREATE JOG TIMESEL R
Control+JogWheelRotaryCCW Reaper "40102" // CREATE JOG TIMESEL
/MasterFader MasterTrackVolume
ZoneEnd
Zone "Send|1-8"
SelectedTrackNavigator
DisplayUpper| TrackSendNameDisplay
TrackTouch+DisplayUpper| TrackSendVolumeDisplay
Mute| TrackSendMute
Fader| TrackSendVolume
Rotary| TrackSendPan
RotaryPush| NoAction
TrackTouch+Fader| TrackSendVolume
FaderTouch| TrackTouch
ZoneEnd
Zone "MasterChannel|"
MasterTrackNavigator
MasterChannelMeterLeft MasterTrackOutputMeter 0
MasterChannelMeterRight MasterTrackOutputMeter 1
MasterFader TrackVolume
MasterFaderTouch TrackTouch
ZoneEnd
Zone "FXMenu|1-8"
SelectedTrackNavigator
DisplayUpper| FXNameDisplay |
DisplayLower| NoAction
Rotary| NoAction
RotaryPush| GoFXSlot |
RotaryPush| Reaper "_S&M_SHOWFXCHAIN|"
ZoneEnd
I know its alot but im just hoping for any help or if someone sees something obvious that im missing and the various CSI setup boxes that need to be checked or not checked. ughh i got my zone files all in disarray for this lol
Thanks evryone
|
Sry to keep bugging you all but i dont know if this just got missed or it just is too much to ask.(sry if it is but im desperate). But did anyone get a chance to glance over this post i sent this morning ? Hopfully mixmonkey too as he has this same kind of setup im trying to achieve? If not its cool I'll keep trying. Thanks all
Sry just edited rhis .its mixmonkey who has the same setup
Last edited by Cragster; 04-22-2020 at 12:54 PM.
|
|
|
04-22-2020, 12:57 PM
|
#8684
|
Human being with feelings
Join Date: Sep 2017
Location: London, England.
Posts: 4,869
|
Quote:
Originally Posted by Geoff Waddington
Depends on what shape one is in when (attempting to ) operate the console.
|
Translation (from personal experience): Even when you're stoned off your face, it's hard to ignore a big, flashing red light
|
|
|
04-22-2020, 01:04 PM
|
#8685
|
Human being with feelings
Join Date: Sep 2017
Location: London, England.
Posts: 4,869
|
Quote:
Originally Posted by Cragster
Sry to keep bugging you all but i dont know if this just got missed or it just is too much to ask.(sry if it is but im desperate). But did anyone get a chance to glance over this post i sent this morning ? Hopfully mixmonkey too as he has this same kind of setup im trying to achieve? If not its cool I'll keep trying. Thanks all
Sry just edited rhis .its mixmonkey who has the same setup
|
Zip up your whole CSI folder and post it
|
|
|
04-22-2020, 01:04 PM
|
#8686
|
Human being with feelings
Join Date: Jul 2007
Location: New Joisey
Posts: 5,988
|
Cragster...why do you have 2 pages setup? Put both surfaces on the same page then get back to us. I'm betting that's the root cause of why you're getting "one or the other" working. Because only one page is active at a time and you've got each surface on one page.
[I'm trying to go back to being helpful after derailing the thread with my MCU blunder. ]
|
|
|
04-22-2020, 01:08 PM
|
#8687
|
Human being with feelings
Join Date: Apr 2019
Location: Inman, SC USA
Posts: 859
|
Quote:
Originally Posted by MixMonkey
Zip up your whole CSI folder and post it
|
Ok thank you .i will soon as i can
|
|
|
04-22-2020, 01:10 PM
|
#8688
|
Human being with feelings
Join Date: Apr 2019
Location: Inman, SC USA
Posts: 859
|
Quote:
Originally Posted by Funkybot
Cragster...why do you have 2 pages setup? Put both surfaces on the same page then get back to us. I'm betting that's the root cause of why you're getting "one or the other" working. Because only one page is active at a time and you've got each surface on one page.
[I'm trying to go back to being helpful after derailing the thread with my MCU blunder. ]
|
Thank you for reply. I thought thats what pages were for.. different surfaces. I didnt know i could set up 2 different surfaces on 1 page setup.
|
|
|
04-22-2020, 01:19 PM
|
#8689
|
Human being with feelings
Join Date: Jul 2007
Location: New Joisey
Posts: 5,988
|
Quote:
Originally Posted by Cragster
Thank you for reply. I thought thats what pages were for.. different surfaces. I didnt know i could set up 2 different surfaces on 1 page setup.
|
Pages are for creating multiple CSI setups you can quickly toggle between. When one page is active, the other pages are inactive.
To start, put all your surfaces on one page, use your standard .mst and .zon files. Now they act as one big eco-system. Like you have a giant surface. Let's call this page "Home." I have 4 surfaces currently in my Home page.
But lets say you want to use a different .zon file for one of your surfaces when you're editing. You want the 3 other surfaces to be the same, but you want one surface remapped to Reaper editing functions. You could create a second .zon folder for your surface (give it a folder name like "MFTwisterEditPage"), and in that new .zon file and folder, remap all your widgets to editing functions. But you need to be able to flip between the Edit .zon file and the regular .zon. How do you do that?
So to make it all work together: you create a second page in CSI. Let's call this page "Edit." You add all your surfaces to this new Edit page, but this time you use your new "MFTwisterEditPage" (whatever you called it) .zon folder instead of your standard .zon. Then you just need a widget+action to flip between "Home" and "Mix" and it's like you've doubled the number of surfaces you have. The switching is instantaneous.
In your case though, you don't want a second page (at least not yet). You just want all your surfaces on the same page, acting as one big happy family.
Last edited by Funkybot; 04-22-2020 at 01:25 PM.
|
|
|
04-22-2020, 01:39 PM
|
#8690
|
Human being with feelings
Join Date: Apr 2019
Location: Inman, SC USA
Posts: 859
|
Quote:
Originally Posted by Funkybot
Pages are for creating multiple CSI setups you can quickly toggle between. When one page is active, the other pages are inactive.
To start, put all your surfaces on one page, use your standard .mst and .zon files. Now they act as one big eco-system. Like you have a giant surface. Let's call this page "Home." I have 4 surfaces currently in my Home page.
But lets say you want to use a different .zon file for one of your surfaces when you're editing. You want the 3 other surfaces to be the same, but you want one surface remapped to Reaper editing functions. You could create a second .zon folder for your surface (give it a folder name like "MFTwisterEditPage"), and in that new .zon file and folder, remap all your widgets to editing functions. But you need to be able to flip between the Edit .zon file and the regular .zon. How do you do that?
So to make it all work together: you create a second page in CSI. Let's call this page "Edit." You add all your surfaces to this new Edit page, but this time you use your new "MFTwisterEditPage" (whatever you called it) .zon folder instead of your standard .zon. Then you just need a widget+action to flip between "Home" and "Mix" and it's like you've doubled the number of surfaces you have. The switching is instantaneous.
In your case though, you don't want a second page (at least not yet). You just want all your surfaces on the same page, acting as one big happy family.
|
Ohhhhhh ok . Thanks thanks thanks !!!! I did know about the pages. I actually do have a 2nd page for editing actions that i gopage between. I just didnt know i could have multiple surfaces on the same page. Im sure thats my problem. What i did was make a page for that new surface and called it FX. Abd then i thought thats what that sync pages check box was for. I was way off lol thanks. Ill try your instructions and let u know. BTW what are those "sync pages" check boxes for ?? Thank you very much. Thank you too MIXMONKEY
|
|
|
04-22-2020, 01:47 PM
|
#8691
|
Human being with feelings
Join Date: Jul 2007
Location: New Joisey
Posts: 5,988
|
Hopefully that solves it. Get everything on the one page, try it out, and let us know if you still run into issues. If so, post your CSI contents and we'll troubleshoot from there.
|
|
|
04-22-2020, 01:59 PM
|
#8692
|
Human being with feelings
Join Date: Apr 2019
Location: Inman, SC USA
Posts: 859
|
Quote:
Originally Posted by Funkybot
Hopefully that solves it. Get everything on the one page, try it out, and let us know if you still run into issues. If so, post your CSI contents and we'll troubleshoot from there.
|
Thank you !!!!!
|
|
|
04-22-2020, 02:06 PM
|
#8693
|
Human being with feelings
Join Date: Mar 2009
Location: Dartmouth, Nova Scotia
Posts: 11,183
|
Haven't heard about EuCon in a while, is everything stable and acting generally pleasant, aside from that weird automation thing and the intermittent non-zero on close thing ?
__________________
To install you need the CSI Software and Support Files
For installation instructions and documentation see the Wiki
Donate -- via PayPal to waddingtongeoff@gmail.com
|
|
|
04-22-2020, 02:12 PM
|
#8694
|
Human being with feelings
Join Date: Mar 2009
Location: Dartmouth, Nova Scotia
Posts: 11,183
|
Quote:
Originally Posted by Cragster
BTW what are those "sync pages" check boxes for ?
|
Say you had an edit workflow page and an FX processing workflow page.
You might want to keep the banking in synch on both pages, so that when you switched from edit to FX processing you end up at the same place, banking wise.
__________________
To install you need the CSI Software and Support Files
For installation instructions and documentation see the Wiki
Donate -- via PayPal to waddingtongeoff@gmail.com
|
|
|
04-22-2020, 02:18 PM
|
#8695
|
Human being with feelings
Join Date: Apr 2019
Location: Inman, SC USA
Posts: 859
|
Quote:
Originally Posted by Geoff Waddington
Say you had an edit workflow page and an FX processing workflow page.
You might want to keep the banking in synch on both pages, so that when you switched from edit to FX processing you end up at the same place, banking wise.
|
Ohhh ok i got ya. Thanks for the info
|
|
|
04-22-2020, 02:18 PM
|
#8696
|
Human being with feelings
Join Date: Jul 2007
Location: New Joisey
Posts: 5,988
|
Quote:
Originally Posted by Geoff Waddington
Haven't heard about EuCon in a while, is everything stable and acting generally pleasant, aside from that weird automation thing and the intermittent non-zero on close thing ?
|
You're gonna regret asking. Hadn't turned the old Eucon on since checking out pans, and that was just before bedtime a few days ago. Checked them out. Went to sleep. Haven't mix a thing since.
Just tried now: big problem with TrackVolume. The Reaper fader barely moves.
1. Open Reaper
2. Load a project
Result: faders all jump to correct positions
3. Move Artist Mix fader
Result: the Reaper volume fader will only move in a range between +1db and 0.00db. The Artist Mix can be set to -80.25 db and the actual fader in Reaper will only go so low as unity.
|
|
|
04-22-2020, 02:25 PM
|
#8697
|
Human being with feelings
Join Date: Mar 2009
Location: Dartmouth, Nova Scotia
Posts: 11,183
|
Quote:
Originally Posted by Funkybot
You're gonna regret asking. Hadn't turned the old Eucon on since checking out pans, and that was just before bedtime a few days ago. Checked them out. Went to sleep. Haven't mix a thing since.
Just tried now: big problem with TrackVolume. The Reaper fader barely moves.
1. Open Reaper
2. Load a project
Result: faders all jump to correct positions
3. Move Artist Mix fader
Result: the Reaper volume fader will only move in a range between +1db and 0.00db. The Artist Mix can be set to -80.25 db and the actual fader in Reaper will only go so low as unity.
|
Thanks, confirmed, probably related to the value stuff we have been messing with, don't worry, will fix as part of this phase
[edit] Ah, got it, Actions default to a range of 0.0-1.0, which is perfect for FX, not so good for db based where -144-24.0 is more like it, will override the defaults in db based Actions
__________________
To install you need the CSI Software and Support Files
For installation instructions and documentation see the Wiki
Donate -- via PayPal to waddingtongeoff@gmail.com
Last edited by Geoff Waddington; 04-22-2020 at 02:33 PM.
|
|
|
04-22-2020, 02:26 PM
|
#8698
|
Human being with feelings
Join Date: Oct 2007
Posts: 784
|
Quote:
Originally Posted by Geoff Waddington
Yeah, we're all totally at the mercy of the action developers whether state is reported.
Are you talking about the rude solo light ?
|
It's this one
|
|
|
04-22-2020, 02:31 PM
|
#8699
|
Human being with feelings
Join Date: Jul 2007
Location: New Joisey
Posts: 5,988
|
Quote:
Originally Posted by Geoff Waddington
Thanks, confirmed, probably related to the value stuff we have been messing with, don't worry, will fix as part of this phase
|
I breathe a huge sigh of relief on the rare occasions you get the same Eucon issues I do.
|
|
|
04-22-2020, 02:32 PM
|
#8700
|
Human being with feelings
Join Date: Mar 2009
Location: Dartmouth, Nova Scotia
Posts: 11,183
|
Quote:
Originally Posted by rothchild
It's this one
|
Could you please turn on input monitor and post the messages this button generates ?
Thanks.
__________________
To install you need the CSI Software and Support Files
For installation instructions and documentation see the Wiki
Donate -- via PayPal to waddingtongeoff@gmail.com
|
|
|
04-22-2020, 02:39 PM
|
#8701
|
Human being with feelings
Join Date: Oct 2007
Posts: 784
|
As in what CSI says or the midi message?
In CSI Edit it just says 'Solo'
In MidiOx it says:
90 5A 7F 1 F# 6 Note On
90 5A 7F 1 F# 6 Note Off
Last edited by rothchild; 04-22-2020 at 02:57 PM.
|
|
|
04-22-2020, 03:19 PM
|
#8702
|
Human being with feelings
Join Date: Oct 2019
Location: Sydney
Posts: 471
|
Quote:
Originally Posted by Geoff Waddington
Haven't heard about EuCon in a while, is everything stable and acting generally pleasant, aside from that weird automation thing and the intermittent non-zero on close thing ?
|
Hey Geoff, I have been away from the studio for the last few days, but EuCon was happy last time I was using it. Will report in when I return.
Yes, the only remaining issue was that dangerous automation touch behaviour.
|
|
|
04-22-2020, 03:26 PM
|
#8703
|
Human being with feelings
Join Date: Mar 2009
Location: Dartmouth, Nova Scotia
Posts: 11,183
|
Quote:
Originally Posted by rothchild
As in what CSI says or the midi message?
In CSI Edit it just says 'Solo'
In MidiOx it says:
90 5A 7F 1 F# 6 Note On
90 5A 7F 1 F# 6 Note Off
|
Thanks.
__________________
To install you need the CSI Software and Support Files
For installation instructions and documentation see the Wiki
Donate -- via PayPal to waddingtongeoff@gmail.com
|
|
|
04-22-2020, 03:27 PM
|
#8704
|
Human being with feelings
Join Date: Mar 2009
Location: Dartmouth, Nova Scotia
Posts: 11,183
|
Quote:
Originally Posted by tdc
Hey Geoff, I have been away from the studio for the last few days, but EuCon was happy last time I was using it. Will report in when I return.
Yes, the only remaining issue was that dangerous automation touch behaviour.
|
It's broken right now everywhere but here, just fixed it, so next build should be fine
__________________
To install you need the CSI Software and Support Files
For installation instructions and documentation see the Wiki
Donate -- via PayPal to waddingtongeoff@gmail.com
|
|
|
04-22-2020, 04:15 PM
|
#8705
|
Human being with feelings
Join Date: Mar 2009
Location: Dartmouth, Nova Scotia
Posts: 11,183
|
New build is up.
Fixed EuCon issues.
Added new Action -- ClearAllSolo, this should set the light properly
Code:
Zone "Buttons|"
BankLeft TrackBank "-8"
BankRight TrackBank "8"
Solo ClearAllSolo
Rewind Rewind
FastForward FastForward
ZoneEnd
__________________
To install you need the CSI Software and Support Files
For installation instructions and documentation see the Wiki
Donate -- via PayPal to waddingtongeoff@gmail.com
|
|
|
04-22-2020, 04:27 PM
|
#8706
|
Human being with feelings
Join Date: Oct 2007
Posts: 784
|
Quote:
Originally Posted by Geoff Waddington
New build is up.
Fixed EuCon issues.
Added new Action -- ClearAllSolo, this should set the light properly
Code:
Zone "Buttons|"
BankLeft TrackBank "-8"
BankRight TrackBank "8"
Solo ClearAllSolo
Rewind Rewind
FastForward FastForward
ZoneEnd
|
Amazing, thanks Geoff. I'll try that tomorrow.
As I've started getting in to editing .zons etc am I right in thinking that I only have to update the .dll in the plugins folder to update?
|
|
|
04-22-2020, 04:30 PM
|
#8707
|
Human being with feelings
Join Date: Sep 2017
Location: London, England.
Posts: 4,869
|
Quote:
Originally Posted by Geoff Waddington
New build is up.
Fixed EuCon issues.
Added new Action -- ClearAllSolo, this should set the light properly
Code:
Zone "Buttons|"
BankLeft TrackBank "-8"
BankRight TrackBank "8"
Solo ClearAllSolo
Rewind Rewind
FastForward FastForward
ZoneEnd
|
Rude solo light working nicely!
|
|
|
04-22-2020, 04:45 PM
|
#8708
|
Human being with feelings
Join Date: Sep 2017
Location: London, England.
Posts: 4,869
|
...but stepped encoders are crashing Reaper.
Accelerated continuous encoders ok.
|
|
|
04-22-2020, 04:46 PM
|
#8709
|
Human being with feelings
Join Date: Mar 2009
Location: Dartmouth, Nova Scotia
Posts: 11,183
|
Quote:
Originally Posted by rothchild
Amazing, thanks Geoff. I'll try that tomorrow.
As I've started getting in to editing .zons etc am I right in thinking that I only have to update the .dll in the plugins folder to update?
|
That's generally true, but keep a close eye, every so often we break things, we warn you, but we still break 'em every now and then, it's still beta
__________________
To install you need the CSI Software and Support Files
For installation instructions and documentation see the Wiki
Donate -- via PayPal to waddingtongeoff@gmail.com
|
|
|
04-22-2020, 04:46 PM
|
#8710
|
Human being with feelings
Join Date: Mar 2009
Location: Dartmouth, Nova Scotia
Posts: 11,183
|
Quote:
Originally Posted by MixMonkey
Rude solo light working nicely!
|
Cool.
__________________
To install you need the CSI Software and Support Files
For installation instructions and documentation see the Wiki
Donate -- via PayPal to waddingtongeoff@gmail.com
|
|
|
04-22-2020, 04:48 PM
|
#8711
|
Human being with feelings
Join Date: Mar 2009
Location: Dartmouth, Nova Scotia
Posts: 11,183
|
Quote:
Originally Posted by MixMonkey
...but stepped encoders are crashing Reaper.
Accelerated continuous encoders ok.
|
Yes, I'm working on stepped as we speak, best not to tread around in there right now, as you have found
__________________
To install you need the CSI Software and Support Files
For installation instructions and documentation see the Wiki
Donate -- via PayPal to waddingtongeoff@gmail.com
|
|
|
04-22-2020, 04:49 PM
|
#8712
|
Human being with feelings
Join Date: Sep 2017
Location: London, England.
Posts: 4,869
|
Quote:
Originally Posted by Geoff Waddington
Yes, I'm working on stepped as we speak, best not to tread around in there right now, as you have found
|
Couldn't resist..
|
|
|
04-22-2020, 05:03 PM
|
#8713
|
Human being with feelings
Join Date: Jul 2009
Posts: 429
|
Wow just noticed the first post was more than 3 years ago. That is serious commitment, guys. Admirable.
Does the project has a tentative timing to go beta?
|
|
|
04-22-2020, 05:20 PM
|
#8714
|
Human being with feelings
Join Date: Jul 2007
Location: New Joisey
Posts: 5,988
|
Quote:
Originally Posted by Geoff Waddington
New build is up.
Fixed EuCon issues.
|
EuCon faders working! Thanks!
|
|
|
04-22-2020, 05:59 PM
|
#8715
|
Human being with feelings
Join Date: Jul 2007
Location: New Joisey
Posts: 5,988
|
|
|
|
04-22-2020, 09:00 PM
|
#8716
|
Human being with feelings
Join Date: Mar 2013
Posts: 17
|
I didn't know about this CSI, very cool. I'm going to have to try it.
I have an old peavey pc1600x...basically a midi device with a bunch of faders and buttons. I wonder if this can work with that. I saw in the tutorial video how the programmer was using midi-ox to get the info from the device and program the stuff on this plugin. So i figure that should work still with the pc1600x.
|
|
|
04-22-2020, 09:34 PM
|
#8717
|
Human being with feelings
Join Date: Jul 2007
Location: New Joisey
Posts: 5,988
|
Quote:
Originally Posted by champ
I didn't know about this CSI, very cool. I'm going to have to try it.
I have an old peavey pc1600x...basically a midi device with a bunch of faders and buttons. I wonder if this can work with that. I saw in the tutorial video how the programmer was using midi-ox to get the info from the device and program the stuff on this plugin. So i figure that should work still with the pc1600x.
|
CSI will work with just about any MIDI, MCU, OSC or Eucon device. Shouldn't be any problem using it with your Peavey as long as it's not sending out any propriety messages.
|
|
|
04-22-2020, 11:56 PM
|
#8718
|
Human being with feelings
Join Date: Jul 2009
Posts: 1,231
|
Quote:
Originally Posted by Geoff Waddington
Yup, totally agree there should be a way for the C1 rotaries to used stepped values.
It's on the list
|
Perfect, that's great news!
|
|
|
04-23-2020, 02:19 AM
|
#8719
|
Human being with feelings
Join Date: May 2019
Location: France
Posts: 41
|
Quote:
Originally Posted by Geoff Waddington
Haven't heard about EuCon in a while, is everything stable and acting generally pleasant, aside from that weird automation thing and the intermittent non-zero on close thing ?
|
Hi Geoff,
I've tried the various last versions, and waited a bit before coming back to you.
I've had some strange behaviour with my Artist Control for the track list on the surface main display. When opening a project, only the 4 first Reaper tracks are displayed and, most of the time) the surface does not follow track selection but, if I then go to the preferences and edit the Eucon in the "Surfaces" panel and click apply (even if I do not change anything), then everything goes back to normal.
I take this opportunity for a couple of questions :
Number one is : how can I help ? Is there a .zon file I could edit to try and implement the commands that are triggered by the buttons just below thr main screen ? For the moment I only added the "Save" function from the Eucon software settings, as it is the one I need most, but I wonder whether this has to be done within Eucon App or if there's a way to assign them to Reaper functions directly from a zone file. I tried adding another .zon and I noticed that it was indeed loaded, in alphabetical order apparently, but gor an error message for a double declaration of the Home zone...
Number two is about the number of channels in CSI/Eucon surface prefs. Does this setting has to be there as it obviously depends on the project, so it needs to be dynamically changed when adding/deleting tracks. I understand that the higher the value, the more computer resources it takes, but, in my case, most projects I work on are 100+ tracks, so...
Last, is more of a secondary thing. Do you think it would be possible to have the automation lanes assigned to faders ? In the midi implementation, the "sends" button allowed to have the sends levels on faders which is normally only possible on Avid's Artist Mix (which has a flip button) but not with the Artist Control, and I really loved to have that functionality. Hence my question.
I hope this finds you and yours well, thanks again for the amazing work you do :-)
|
|
|
04-23-2020, 03:27 AM
|
#8720
|
Human being with feelings
Join Date: Feb 2009
Posts: 90
|
Noob guidance please?
I've been messing about for a while now but not making much headway but have cleared a few gremlins/fups on my part.
I'm on latest Reaper and latest beta build as of the date of this message. I'm trying to set up an X Touch Mini and am using the stock files in the zip.
With all loaded and the CSI Edit action up with Monitor In on Reasconsole window, I can see the XTM communicating, moreso, the actions defined in the zone file perform correctly with the Reaper project; e.g. master fader moves, load a track and 1st rotary adjusts the track volume. All good.
So, the issue appears to be: If I click on Monitor Out, I get a constant stream of data, processor count jumps to 20% +. The data stream consists of:
Code:
IN <- X Touch Mini LayerA_UpperButton1 1.000000
IN <- X Touch Mini 8a 08 00
Channel1->TrackVolume---->X Touch Mini->LayerA_Rotary1 ba 01 5f
Channel2->TrackVolume---->X Touch Mini->LayerA_Rotary2 ba 02 61
Channel3->TrackVolume---->X Touch Mini->LayerA_Rotary3 ba 03 00
Channel4->TrackVolume---->X Touch Mini->LayerA_Rotary4 ba 04 00
Channel5->TrackVolume---->X Touch Mini->LayerA_Rotary5 ba 05 00
Channel6->TrackVolume---->X Touch Mini->LayerA_Rotary6 ba 06 00
Channel7->TrackVolume---->X Touch Mini->LayerA_Rotary7 ba 07 00
Channel8->TrackVolume---->X Touch Mini->LayerA_Rotary8 ba 08 00
Channel1->TrackMute---->X Touch Mini->LayerA_UpperButton1 9a 08 7f
Channel2->TrackMute---->X Touch Mini->LayerA_UpperButton2 8a 09 00
Channel3->TrackMute---->X Touch Mini->LayerA_UpperButton3 8a 0a 00
Channel4->TrackMute---->X Touch Mini->LayerA_UpperButton4 8a 0b 00
Channel5->TrackMute---->X Touch Mini->LayerA_UpperButton5 8a 0c 00
Channel6->TrackMute---->X Touch Mini->LayerA_UpperButton6 8a 0d 00
Channel7->TrackMute---->X Touch Mini->LayerA_UpperButton7 8a 0e 00
Channel8->TrackMute---->X Touch Mini->LayerA_UpperButton8 8a 0f 00
LayerA_Buttons|->Reaper---->X Touch Mini->LayerA_LowerButton3 9a 12 7f
LayerA_Buttons|->Reaper---->X Touch Mini->LayerA_LowerButton4 9a 13 7f
LayerA_Buttons|->CycleTimeline---->X Touch Mini->LayerA_LowerButton5 9a 14 7f
LayerA_Buttons|->Stop---->X Touch Mini->LayerA_LowerButton6 9a 15 7f
LayerA_Buttons|->Play---->X Touch Mini->LayerA_LowerButton7 8a 16 00
LayerA_Buttons|->Record---->X Touch Mini->LayerA_LowerButton8 8a 17 00
Channel1->TrackPan---->X Touch Mini->LayerB_Rotary1 ba 0b 3f
Channel2->TrackPan---->X Touch Mini->LayerB_Rotary2 ba 0c 3f
Channel3->TrackPan---->X Touch Mini->LayerB_Rotary3 ba 0d 00
Channel4->TrackPan---->X Touch Mini->LayerB_Rotary4 ba 0e 00
as an example. This cycles through all the elements, again and again.
Grateful for some guidance please?
Grateful if someone could share a known working XTM .mst and .zon files please should they be different from the stock?
Additionally, if I add ReaComp to my blank track 1 and touch the slider e.g. Thresh and e.g. layerA_UpperRotary2 so they both appear in the "Adjust Surface Control" and "Adjust Focused FX Param" windows, my assumption would be that control should then control the param but it doesn't do anything [other than report in the mon in window]. There's a zon file for ReaComp in the stock Zones dir
Apologies for the dumb cluck Q's. Cheers
Yorky
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 04:21 AM.
|