View Single Post
Old 02-14-2019, 09:21 AM   #2593
MixMonkey
Human being with feelings
 
MixMonkey's Avatar
 
Join Date: Sep 2017
Location: London, England.
Posts: 817
Default

Quote:
Originally Posted by Geoff Waddington View Post
Let's assume you have an XT and an MCU side by side.

You Alt+Select a Track on the XT -- the XT rotaries are now Send levels.

Ok so you have a selected Track -- that means one of the 8 XT select buttons is lit up.

Now you bank so that the selected Track is now on the MCU.

The lit, selected Track is on the MCU, but the rotaries that control the Sends are on the XT.

If you press Alt+Select the rotaries on the XT will be restored to initial Zone.

If you press Alt+Select again, this time the MCU rotaries will be taken over, since the selected Track is now on the MCU.
This is fine Once you know this is how it works, you'll adjust accordingly. I'd just bank the track under scrutiny onto the MCU, then Alt+Select it.

Or more likely use the C4 for all these kind of things It certainly reinforces the case for having a C4/Console1 type controller in your setup.
MixMonkey is offline   Reply With Quote