Quote:
Originally Posted by pljones
Above applies to hardware or software audio feeds into Reaper. For MIDI feeds with virtual instruments hosted in Reaper, you need to add a step 5.2 (dropping 5 and 5.1 if not needed).
5.2) As ever, create a track, setting it to "monitor track input while recording" and "record disable (input monitor only)", arm the track and turn on monitoring. The track also needs to accept MIDI input from your device -- right-click->MIDI Inputs->All MIDI Inputs->All Channels is a good starting point. Now, click the FX button to insert track FX and select your virtual instrument. When you play your MIDI device, you should see a small red square appear at the left end of the track meter and hear some output.
|
Don't understand this.
Record disable then arm the track part.