View Single Post
Old 09-13-2019, 10:55 AM   #16
karbomusic
Human being with feelings
 
karbomusic's Avatar
 
Join Date: May 2009
Posts: 25,418
Default

ReaInsert auto-adjusts for latency so showing only 1 sample off is probably about right, the best true loopback method is to use a physical cable...

Track 1: Some audio signal such as a single square wave sample. Use a send to send this out of the SC on let's say "Output 3".

Run a cable from physical Output 3 to physical Input 4.

Track 2: Set to record Input 4.

Press record so that Track 1 sends it's audio out and Track 2 receives it. Then measure that delta/latency between the recorded and original. Also... to get all the latency you probably want to turn off the option in preferences that auto-adjusts for driver reported latency, otherwise you'll only see the unreported latency which on UFX (in my setup anyway) is in 50ish samples range.

^That said, once you've calculated full latency, turn driver reported back on, do the test again, any latency that remains is unreported and you can offset that in record/playback offest settings.

Welcome to the forum btw.
__________________
Clever is not the same as good, clever is from the head, good is from the heart. -Benmont Tench

Last edited by karbomusic; 09-13-2019 at 11:02 AM.
karbomusic is offline   Reply With Quote