Quote:
Originally Posted by MixMonkey
This is most likely your problem. When the BCR receives sysex, the LED display has a little circular dance it does. Make sure you have one MIDI in port and one MIDI out port activated in MIDIOX. I used MIDIOX to test the sysex file I saved from BCR Manager, so it does work.
Having said all that, it is definitely worth your while getting BC Manager working. Developing these files would have been close to impossible without it.
BTW are you on Windows or Mac?
|
Thanks for your help with this. PC/Windows 10.
When I set up the midi device in BC Man and detect B-Controls, it complains about a midi loop.
When I select my BCR, then open the .bcr file, then hit send all data, the BCR does the little dance you describe, but while it's apparently sending, BC Man complains:
Error: MIDI system exclusive error
Wrong command
Message 292
For every command. The lights of the encoders all set one by one, then it's done.
Same result in Reaper.
BTW, it's an old unit with firmware 1.07 rather than the latest 1.10. Could that make a difference?