Banned,
v07 works but with my solo/mute selected and Master Mute tweaks. I am unable to get Cmd ID 6,7 to work here. They don't show with any number when trying to learn. I know this is a workaround and is not going to work as a blanket for everyone until they tweak their own. It is just that for now, a workaround
I also made a 'bare bones' version of ReaperOSC to only show what SM needs/uses.
The pans all work great now, I set mine to 1/99 as it then move 2% per click and is the same on each side ie. R=2, L=2... 1/200 works but is a bit slow to reach the destination. 1/100 works but moves R=3, L=2... weird but that how it works here.
The calibration and re-scaling now work perfectly...
mine are set to: max 0.716 and min 0... StudioMix will now show 0db-inf in Reaper. Sometimes I need to jostle the bottom end to reach inf but top end to 0db is perfect.
This seems to be a nearly working combo for me. The fader jitter/creep when scrolling banks still makes it problematic. IE, moving from bank to bank either by mouse or SM makes the faders move to different levels upon returning to them.
Example:
load 32 tracks
Set track 1 to -3db
Scroll up and banks a few times and check if track 1 is till at -3db....
mine moves erratically up or down. This happens on all tracks when set and then banked up or down... The levels change each time..
I am not sure if this can be fixed. It seems like we need some sort of feedback shutoff during banking, once the bank is set then feedback is resumed and the faders jump to position.
The multi-select jitter/creep is still present but seems to be improving.
I have Jitter Eater off as it only seems to change the range of the faders and not amount of jitter/creep.
I have "Dead Zone" set to 500 and seems to improve jitter... It makes the latency increase between SM and Reaper. Around 500 seems to work okay.
I will post back with more details after testing. Let me know if there is a specific setting you would like for me to try.
This is absolutely amazing stuff. I can't thank you enough!!!
N2N