View Single Post
Old 01-01-2018, 06:01 PM   #429
Geoff Waddington
Human being with feelings
 
Geoff Waddington's Avatar
 
Join Date: Mar 2009
Location: Dartmouth, Nova Scotia
Posts: 5,036
Default

Quote:
Originally Posted by Freex View Post
I was playing around today, MCU PRO (USB midi onboard) the mcu faders are running off midi 3,4,
Control (which I've come to believe is transport) needs set to 4,5
Does that mean the faders and trans are not on the same port,
The master doesn't work, but if I press the bank left button, the faders change , one stays up, and that one works the master.
That's because the surfaces named Mix and Control are actually Avid Artist series physical surfaces in Mackie Control mode, so the transport is on the Control, a separate device, that's why the number strangeness.

Don't worry too much about this, it will all clear up when real external maps are implemented.

Quote:
Originally Posted by Freex View Post
How do I get pan values displayed?
The pan should show on the rings and should change styles when the top is pushed and you have a track that is set to stereo pan.


Quote:
Originally Posted by Freex View Post
I've been looking at the midi values for the C4, all written down, any suggestions as to where to start mapping wise?
i would do as fundorin suggested, it's pretty much a standard style for matrix type surfaces.

So map the rotaries, push top switches, and displays thusly:

// push top switches
A1Switch
A2Switch
A3Switch
A4Switch
A5Switch
A6Switch
A7Switch
A8Switch
...
D8Switch


// rotaries
A1Rotary
...
D8Rotary

// displays
A1Display
...
D8Display

I think if we come up with very simple naming conventions this whole idea will work quite well.
__________________
CSI - You can donate here: geoffwaddington.ca
Beta software: https://stash.reaper.fm/v/38349/CSI%20beta.zip
installation and documentation here: https://github.com/malcolmgroves/reaper_csi/wiki
Geoff Waddington is offline   Reply With Quote