View Single Post
Old 08-23-2018, 02:31 PM   #92
Glennbo
Human being with feelings
 
Glennbo's Avatar
 
Join Date: Mar 2008
Location: Planet Earth
Posts: 4,566
Default

Quote:
Originally Posted by Jack Winter View Post
I hope I've struck gold..

Try this:
Code:
pcm.multi_capture {
	type multi
	slaves.a.pcm hw:M2496
	slaves.a.channels 12
	slaves.b.pcm hw:M2496_1
	slaves.b.channels 12

# First 8 channels of first soundcard (capture)
 	bindings.0.slave a
 	bindings.0.channel 0
 	bindings.1.slave a
 	bindings.1.channel 1
 	bindings.2.slave a
 	bindings.2.channel 2
 	bindings.3.slave a
 	bindings.3.channel 3
 	bindings.4.slave a
 	bindings.4.channel 4
 	bindings.5.slave a
 	bindings.5.channel 5
 	bindings.6.slave a
 	bindings.6.channel 6
 	bindings.7.slave a
 	bindings.7.channel 7
    
# First 8 channels of second soundcard (capture)
 	bindings.8.slave b
 	bindings.8.channel 0
 	bindings.9.slave b
 	bindings.9.channel 1
 	bindings.10.slave b
 	bindings.10.channel 2
 	bindings.11.slave b
 	bindings.11.channel 3
 	bindings.12.slave b
 	bindings.12.channel 4
 	bindings.13.slave b
 	bindings.13.channel 5
 	bindings.14.slave b
 	bindings.14.channel 6
 	bindings.15.slave b
 	bindings.15.channel 7

# S/PDIF section. Uncomment bindings if required.

# S/PDIF first soundcard (capture)
 	#bindings.16.slave a
 	#bindings.16.channel 8
 	#bindings.17.slave a
 	#bindings.17.channel 9
    
# S/PDIF second soundcard (capture)
 	#bindings.18.slave b
 	#bindings.18.channel 8
 	#bindings.19.slave b
 	#bindings.19.channel 9
}

ctl.multi_capture {
	type hw
	card M2496
}

pcm.multi_playback {
	type multi
	slaves.a.pcm hw:M2496
	slaves.a.channels 10
	slaves.b.pcm hw:M2496_1
	slaves.b.channels 10

# First 8 channels of first soundcard (playback)
 	bindings.0.slave a
 	bindings.0.channel 0
 	bindings.1.slave a
 	bindings.1.channel 1
 	bindings.2.slave a
 	bindings.2.channel 2
 	bindings.3.slave a
 	bindings.3.channel 3
 	bindings.4.slave a
 	bindings.4.channel 4
 	bindings.5.slave a
 	bindings.5.channel 5
 	bindings.6.slave a
 	bindings.6.channel 6
 	bindings.7.slave a
 	bindings.7.channel 7

# First 8 channels of second soundcard (playback)
 	bindings.8.slave b
 	bindings.8.channel 0
 	bindings.9.slave b
 	bindings.9.channel 1
 	bindings.10.slave b
 	bindings.10.channel 2
 	bindings.11.slave b
 	bindings.11.channel 3
 	bindings.12.slave b
 	bindings.12.channel 4
 	bindings.13.slave b
 	bindings.13.channel 5
 	bindings.14.slave b
 	bindings.14.channel 6
 	bindings.15.slave b
 	bindings.15.channel 7

# S/PDIF section. Uncomment bindings if required.

# S/PDIF first soundcard (playback)
 	#bindings.16.slave a
 	#bindings.16.channel 8
 	#bindings.17.slave a
 	#bindings.17.channel 9
    
# S/PDIF second soundcard (playback)
 	#bindings.18.slave b
 	#bindings.18.channel 8
 	#bindings.19.slave b
 	#bindings.19.channel 9
}

ctl.multi_playback {
	type hw
	card M2496
}
Start JACK with: /usr/bin/jackd -P80 -S -dalsa --C multi_capture -P multi_playback -r44100 -p64 -n2 -Xseq
That one does start and honor the device name, but only the first card is seen by REAPER still. I did remove the double "--" on the C switch, as it was causing an error and I assume that was just a typo.

Don't know if this will shed any light, but this is how I have the patchbay setup that does get all four channels to REAPER using QjackCtrl.

__________________
Glennbo
Hear My Music - Click Me!!!
--

Last edited by Glennbo; 10-22-2018 at 04:14 PM.
Glennbo is offline   Reply With Quote